Server problem

[McBloom]

yp_add] yp.shoutcast.com gave extended error (404 Cannot see your station/computer from the Internet, disable Internet Sharing/NAT/firewall/ISP cache) what seems to be the problem?? I read the documentation and found nothing on this.

[Project B]

disably your fire wall, either softweare or with a hardware/ router.

[McBloom]

i have a router would that be a problem? I have already took off my router firewall and still gave me the message

[Project B]

open the port needed (deualt, 8000). by turning it off, do you mean you used dmz?

[Retro_Boy]

First of all, you need admin access to your web based router configuration. Which is pretty simple, but you need the ip address. Like for a Belkin it is 192.168.2.1 and for a US Robotics Wireless, I believe it is 192.168.123.100.

But it is different for every router.

Anyways, once you get in, you need to look for Virtual servers, port forwarding, whatever.
Just port forward 8000, or whatever port you have specified for Shoutcast to the ip address your router gave you.
Once that is all set up, it should work.

[McBloom]

iight well I got a speedstream router and the ip is 67.112.140.222:8000

[GENESIS]

Two (or less) easy steps:
1. If you have a firewall, open the necessary port(s).
2. If you have a router, configure it to forward the necessary port(s) to the DNAS machine.

Check out the SHOUTcast Technical Support Sticky post titled:
SHOUTcast: Important Info & Answers to FAQs. READ ME!

Scroll down a bit and look for the section titled:
DNAS Stuff -> Errors -> Fixing [yp_add] yp.shoutcast.com gave extended error (Cannot see your station/computer (IP: xxx.xxx.xxx.xxx:xxxx) from the Internet, disable NAT/firewall/ISP cache (Connection timed out)

Are the necessary ports open in your firewall and are they being forwarded to the DNAS machine?

Are you using Windows XP?
That has an internal firewall.
Either configure it or disable it.

Does your ISP block ports?

Check out http://www.radiotoolbox.com/cantheygetin and see if the reported information there helps.

Try setting the DNASs YPort to 666.
Check out the DNASs sc_serv.ini/conf configuration file for the section (default shown below):; Yport, port to connect to yp.shoutcast.com on. For people behind caching
; webproxies, change this to the alternate port (666 is what it might be,
; check www.shoutcast.com if you have problems). Otherwise, leave this at 80.
; We're actively working on re-opening port 666, but as of release the only
; working port is port 80.
Yport=80

Please read some polite advice. (http://forums.winamp.com/showthread.php?s=&postid=1073288#post1073288)

copyright Festerhead