input problem!

[ksp69]

ok...when i broadcast in radio on 56 kbps only songs without the "input" it's ok!, the problem is when in the "input" i chance to "soundcard input" the broadcast is cut to 5 second and after 5 second i see that it chance to 24 kbps. here is the log:
<07/18/04@00:13:48> [source] connected from 212.179.176.143
<07/18/04@00:13:50> [source] icy-name:Unnamed Server ; icy-genre:
<07/18/04@00:13:50> [source] icy-pub:1 ; icy-br:56 ; icy-url:http://www.shoutcast.com
<07/18/04@00:13:50> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A
<07/18/04@00:14:10> [source] source dropped connection. disconnecting.
<07/18/04@00:14:28> [source] connected from 212.179.176.143
<07/18/04@00:14:30> [source] icy-name:Unnamed Server ; icy-genre:
<07/18/04@00:14:30> [source] icy-pub:1 ; icy-br:24 ; icy-url:http://www.shoutcast.com
<07/18/04@00:14:30> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A

[DJCassio]

Known Bug, use encoder 2

DSP :: Encoder 1 Defaults to 24 kbps When Switching Input Device Bug
Date Reported: 5/27/2002 (m/d/y)
Version: 1.8.2b (guessing 1.8.2a too)
Details: When switching the Input Device from Winamp to Soundcard Input the settings for encoder 1 are not carried over and revert back to 24 kbps, 22 kHz, Mono (encoder still shows previous bitrate but 24 kbps is streamed). Soundcard Input to Winamp works as it should.
Workaround: Do not use encoder 1 if you will be switching the Input Device frequently. If you need all five encoders then be sure to reset the bitrate on encoder 1 after switching from Winamp to Soundcard Input.
Status: Awaiting Developers Response

[ksp69]

i can't switching the encoder:when i switching the encoder from 1 to another number(2,3,4,5)i can't connect,and i try in another output(2,3,4,5)

[ksp69]

mayb have another version then not do problems

[DJCassio]

You encoder does not determine if you can connect or not. Read the KNOWN BUG report again. When you switch from winamp to soundcard and back, encoder 1 doesn't remember it's previous settings. Use encoder 2, it will cure your problems. Another version is going to cause other problems. Stick with 1.8.2b.

[ksp69]

u help me.!!

[Smartboy4]

he meant just connect output 2 (instead of 1) meaning that you don't connect 1 at out . Just put in the same settings for output 2 and that should work fine .

[ksp69]

i do this!! 10x!!