View Full Version : How do I play directly into line in ?
7th September 2004, 23:00
I mean, I want winamp to play music and to speak to the microphone, and the music will be mixed with the voice and both of them will be played as if were connected to line in.
Just to be clear : To do that I can connect the microphone and the CD player to mixer and then into line in...
I'm asking this because the application I'm using just "hear" the microphone and not the mp3 song played in winamp.
Thanks, Q Factor
7th September 2004, 23:20
Basically the same idea as this...
CD & LineIn Visualizations (http://forums.winamp.com/showthread.php?s=&threadid=64973)
7th September 2004, 23:25
JonnyMac - this is for "input". I need something for the output.. something that will play the output directly to line in (and from there as if it is the microphone transmitting the music)
7th September 2004, 23:55
Ok I am a little bit confused here. You don't have anything physical to connect to the LineIn or microphone port of the sound card. However, you want Winamp to play as if it was playing through the microphone? In other words do a little "software magic" and play through the microphone as input (or output).
That, I don't think is possible.
Otherwise maybe Jasper's LineIn Plug-in (http://home.hccnet.nl/th.v.d.gronde/dev/lineinWA2/index.html) is what you are looking for. If you are indeed connecting something to the LineIn/Microphone ports, it will allow you to teak the input with the EQ or a DSP/Effects plug-in. Documentation (http://home.hccnet.nl/th.v.d.gronde/dev/lineinWA2/doc/index.html) for the plug-in is provided at the site. Note Jasper's plug-in uses line:// and not Winamp's default linein://. Also Jasper's plug-in is a third party plug-in. Third party plug-in are not support on Winamp forums.
8th September 2004, 00:06
I agree it sounds a little bit "impossible mission", BUT:
There are programs who capture the line in (well... even a simple win recorder). I am sure it is possible to manipulate the sound from winamp to the port (is it a port?) of the microphone. Something like redirecting output-port to input-port. Isn't it possible??
Imagine that somebody captures your microphone port(?). There is must be a way to transmit to him through winamp (and he can't know if it comes from the mic or from an applic, because he's still monitoring only the mic).
Must be a way..
8th September 2004, 00:16
Sorry, not sure about that one. Maybe someone else can suggest something. Anyone else?
8th September 2004, 00:22
Anyone can help me with that??
9th September 2004, 20:09
17th September 2004, 13:13
ok, I'll rephrase. Lets say I'm transmitting something through blogTv. It captures my microphone, but not the winamp music. How to deal with something like this (I assume the solution will be good for my application).
5th November 2004, 09:39
5th November 2004, 15:21
Originally posted by Q_Factor
ok, I'll rephrase. Lets say I'm transmitting something through blogTv. It captures my microphone, but not the winamp music.
enable stereo mix in your volume settings ( recording part)
this should do the trick
the volume settings in your OS that is!!
5th November 2004, 20:20
Thank You spaceplay :)
Depending on you soundcard, it may be worded differently. "Stereo Out" or "Wave Out" just to name a couple. Please, let us know if it works out.
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.