Setting Sc_trans.conf When Using Line-in

[sandyh]

Thanks Tom and Evil Lu for heading me in the right direction. Have found sc_trans and installed. Am setting up the sc_trans.conf file. I will not be broadcasting from mp3 files on my computer, but from another computer attached to my shoutcast computer using line in through sound card. How would I need to set up my sc_trans.conf file? When setting up the playlist file what would I need to put there? Is there anything else I would need to set up differently either here in the sc_trans.conf file or in sc_serv.conf? Thanks for the help. You guys are amazing. All that work just to help out. You have no idea how I appreciate it. Couldn't have done it without you.

[sandyh]

Ok, said I probably wouldn't have any trouble installing. guess I was wrong. Here goes. Sorry for the lengthy note here. This is what I did, and this is what i got. Can you help. I am trying to set this up to be able to stream from music coming into the sound card through the line in.

sandyhaga@linux:/usr/plugin/sc_trans_040> ./sc_trans_linux sc_trans.conf
*******************************************************************************
** TRANScast Distributed Network Audio Content Provider
** Copyright (C) 2000 Nullsoft, Inc. All Rights Reserved.
** Use "sc_trans filename.conf" to specify a config file.
*******************************************************************************
[conf] Warning: invalid statement on line 1
[conf] Warning: invalid statement on line 19
[conf] Warning: invalid statement on line 20
File size limit exceeded
sandyhaga@linux:/usr/plugin/sc_trans_040>

Here is how I set up my sc_trans.conf
; Sample sc_trans/0.35-j config file
; j.frankel 12/05/00
; t.pepper 10/31/00
; (relays not supported, yo)
;
; sc_trans operates in one of two modes, either reading mp3s off disk, decoding,
; re-encoding, and then broadcasting them, or relaying from a shoutcast server,
; transcoding to a lower bitrate, and broadcasting to a new server.

; sc_trans accepts the following signals:
; HUP - flush logfiles (close and reopen) -- will make console logging stop
; WINCH - jump to next song
; USR1 - reload playlist off disk (will not interrupt current playing stream)
; USR2 - toggle shuffle on/off
; TERM - normal sc_trans shutdown (clean)

; PlaylistFile (required EVEN IF RELAYING) - playlist file (to create, use
; find /path/to/mp3/directory -type f -name "*.mp3" >
(Just a note here. I got this next couple of lines from the example 1st file that comes with sc_trans file. Said this would make it play from line in instead of from files on computer which is what I want to do. Think this is part of my problem but don't know how to fix it.)
DSP:/dev/audio
DSP:/dev/audio

; ServerIP/ServerPort are the target server to send to
ServerIP=68.170.75.66
ServerPort=8000

; Password is the password on the sc_serv you're sending to.
Password=John3:16

; StreamTitle/URL/Genre define the data that appears on the directory and in the
; stream info.
StreamTitle=WHHV Radio
StreamURL=http://68.170.75.66:8000/listen.pls
Genre=Music

; Logfile optionally denotes a text file to log sc_trans to. a kill -HUP
; will force a close and re-open of this file (but will also cease logging to
; the console)
LogFile=sc_trans.log

; Shuffle the playlist
Shuffle=1

; Bitrate/SampleRate/Channels recommended values:
; 8kbps 8000/11025/1
; 16kbps 16000/11025/1
; 24kbps 24000/22050/1
; 32kbps 32000/22050/1
; 64kbps mono 64000/44100/1
; 64kbps stereo 64000/22050/2
; 96kbps stereo 96000/44100/2
; 128kbps stere0 128000/44100/2
Bitrate=24000
SampleRate=22050
Channels=1
; Quality is from 1-10. 1 is best, 10 is fastest.
Quality=1


; Mode=0 for none, 1 for 100/100->100/0, 2 for 0/100->100/0
CrossfadeMode=1
; Length is ms.
CrossfadeLength=8000

UseID3=0

; Public determines whether or not this station will show up in the directory
Public=1

; Put stuff here for user interaction (AOL IM, ICQ, IRC)
AIM=AIMHandle
ICQ=
IRC=shoutcast

Please help. Any ideas? What have I done wrong? Appreciate your help.