Station not clustering

[stardoginc]

I have 1 main and 2 relays and they will not cluster. All the settings are default. Can anyone tell me why their not syncing up. I was told by someone that shoutcast has work over the YP and this might be the cause.... Any info would be great to hear

[Highway 420]

Your relay servers (you're using SHOUTcast servers to relay, right?) must be set to mirror your main server. Go into your relays' sc_serv.ini file and look for this section:

; RelayPort and RelayServer specify that you want to be a relay server.
; Relay servers act as clients to another server, and rebroadcast.
; Set RelayPort to 0, RelayServer to empty, or just leave these commented
; out to disable relay mode.
; RelayPort=8000
; RelayServer=192.168.1.58


Remove the semicolons from the last two lines and change the port and IP address to match those of your main server. Save, exit, restart the relays.

[stardoginc]

I already have it all running like that. It's just not shown them all together. Go to shoutcast and do a search for stardog. You will see that there is one with 150 and one with 180. Now the 180 is 2 different servers relaying off of the 150. I can't get anything to cluster with the 150 server. Thew weird thing is that the server is set to a default setting, except for the relay section. So there is not reason for it not to allow them to cluster.....

[Highway 420]

Interesting...your relays are clustering together but not with the main, eh? I'm at a loss on this one.