God damn . d-link port firewall question - tried seach notin works
 

Hi
i came here longtiem ago and had the same problem with my stupid d-link 604 with firewall always on
--I DID ALL SEARCHES AND ALL PORT FORWARDING EVEN their site so pls dont say i didnt read or didnt do that cuz ill put some screenshots ---

This is what im asking .
Someone who knows how to use the Server->Firewall feature of a d-link 604 so i can have all pots open
Someone gave me that on this forum but i lost it :cry:

So pls only the firewall thing
Thx a lot

One part you didn't read, 'search before posting' here are the results for d-link 604
http://forums.winamp.com/search.php?...der=descending

Here is the answer. Next time search before posting.

http://forums.winamp.com/showthread....hreadid=182516

Maybe it's working and you don't know it?

I only say that bacause you said that you want to open all ports [pots] -- that's called DMZ, and it will forward all ports to a single address [LAN IP], AND if doing so will turn OFF any port forwarding you may configure without telling you so.

So, what did you do EXACTLY? What error are you getting (cannot see your station, perhaps?) -- did you assign a static IP to the DNAS box?

*** No fast answers here -- Firewall/NAT configuration is a tedious process -- attention to detail is utterly important ***

OK now u dont it
EVIL LU WTF i wrote in that post???? i said i read allllllllllllllllllllllllllllllllll the fuc ingggggg seach answeras idiottttt omg man wtf u blind or what???
god damn peepz

sorry admin for this but guys like this piss me of when i just said waht i was clearly oouf ouf

yeah i know how to check it adn to see if its working

Anyways I got what i wanted just didnt know how this thing with firewall worked




1. Open your router admin page. usually by entering 192.168.0.1 into a webbrowser. Type Admin as the username and leave password blank.

2. Once in, click Advanced then DMZ and disable it. Then click Apply.

3. Next click Virtual Servers (in the Advanced menu). You are then going to add 2 Virtual Servers by entering the following information.
a. Enabled
b. Name - A name for you server. (can be anything)
c. Private IP - Enter the IP for the computer you are broadcasting from. (To find this click Start> Run> Type cmd> Type ipconfig)
d. Protocol Type - Both
e. Private Port - For first server enter the port you are broadcasting from. For the second enter the port after. (ie. 8000 & 8001)
f. Public Port - Enter same as Private Port
g. Schedule - Always
h. Click Apply, repeat for second server.

4. Then go to Firewall and enter the following
a. Enabled
b. Enter a name for the firewall.
c. Click Allow
d. Source - interface = WAN, IP Range Start = *, IP Range End = ENTER NOTHING HERE!
e. Destination - interface = LAN, IP Range Start = YOUR PRIVATE IP, IP Range End = ENTER NOTHING HERE!, Protocol = *, Port Range = * - NOTHING
f. Schedule - Always
g. Select Apply.

Oh that's nice. We really want to help you now...

i said im sorry but ... u know i was working so hard went thru every search post it gave me and this guys saying that i didnt searched :(

let me try the code i found see if it works

I hope what you found works because you dissed my friend, so I can't help you anymore :(

Do that again and I'll report you to a moderator, flaming is not allowed and that was entirely uncalled for.
Your English typing is rather hard to understand and from what you typed originally
--I DID ALL SEARCHES AND ALL PORT FORWARDING EVEN their site
looked like you had used the d-link site not this one. I'll kindly thank you to refrain from being rude to me or any other member now or in the future.

yeah sorry I typed all that fast didnt rechecked

anyways the thing I found works