what causes the dsp to disconnect?

global_groove6 · 7th January 2003, 16:54

does anyone know what causes the DSP to disconnect and not reconnect automatically? Sometimes it will just stop for no apparent reason and I have to hit connect manually in order for it to work again even if I have auto-recconect selected. I am using DSP 1.8.0 + OTSjuke and it's getting pretty annoying. Please don't tell me to use the new DSP either because I stream at 96kbps and that bitrate is such a horrible quality on the newer DSP.

FesterHead · 7th January 2003, 17:44

Does the problem exist using straight Winamp/DSP to a DNAS?

global_groove6 · 7th January 2003, 19:01

otsjuke --> sam stacker --> 2 X dsp 1.8.0 --->dnas

The problem was much worse when I used winamp. I just managed to get the SAM encoder working with otsjuke which allows me to use my own codecs along with multiple streams. lets hope this works.

Do you think the problem can occur as a result of weak pings? my pings have been up and down latetly.

global_groove6 · 7th January 2003, 19:42

ok well it seems to be streaming fine but now the title updates arent working. grrrr I am about to give up soon.

global_groove6 · 7th January 2003, 19:53

I keep getting this message:

<01/07/03@12:48:32> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request)
<01/07/03@12:48:43> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request)
<01/07/03@12:48:44> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request)
<01/07/03@12:48:45> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request)

Tom · 7th January 2003, 20:19

If the DSP and DNAS are not on the same machine than a slow network will cause drops in the DSP. A way to avoid this is to setup a local DNAS and then set the broadcast DNAS up to relay the local DNAS.
As far as the Bad Request this is due to the DSP sending improperly encoded data. Usually it is a space in your AIM, ICQ or IRC entry.

Tom

global_groove6 · 7th January 2003, 21:00

I thought the bad request was due to improper entries in the AIM ICQ and IRC entry but I'm pretty sure I have it configured properly. Tried various combinations, spaces, no spaces etc and it still wont work.

Swiftie · 30th January 2003, 01:08

K! I've had this problem to!
I've searched all over the place but no luck!!

Basically, I can stream, but this is only if I use WIN AMP to play a MP3 trough the program. But as soon as I select SOUNDCARD, then Shoutcast 1.8.0 DSP goes nutty & will lock off the server after a few secs!! Any one know the reason for this??

Thanx in advance!

Brgs

7th January 2003, 16:54	#1
global_groove6 Senior Member Join Date: Oct 2002 Location: Toronto Posts: 391	what causes the dsp to disconnect? does anyone know what causes the DSP to disconnect and not reconnect automatically? Sometimes it will just stop for no apparent reason and I have to hit connect manually in order for it to work again even if I have auto-recconect selected. I am using DSP 1.8.0 + OTSjuke and it's getting pretty annoying. Please don't tell me to use the new DSP either because I stream at 96kbps and that bitrate is such a horrible quality on the newer DSP. PlanetSoul Network Tune-in @128kbps\|32kbps

7th January 2003, 19:01	#3
global_groove6 Senior Member Join Date: Oct 2002 Location: Toronto Posts: 391	otsjuke --> sam stacker --> 2 X dsp 1.8.0 --->dnas The problem was much worse when I used winamp. I just managed to get the SAM encoder working with otsjuke which allows me to use my own codecs along with multiple streams. lets hope this works. Do you think the problem can occur as a result of weak pings? my pings have been up and down latetly. PlanetSoul Network Tune-in @128kbps\|32kbps

7th January 2003, 19:42	#4
global_groove6 Senior Member Join Date: Oct 2002 Location: Toronto Posts: 391	ok well it seems to be streaming fine but now the title updates arent working. grrrr I am about to give up soon. PlanetSoul Network Tune-in @128kbps\|32kbps

7th January 2003, 19:53	#5
global_groove6 Senior Member Join Date: Oct 2002 Location: Toronto Posts: 391	I keep getting this message: <01/07/03@12:48:32> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request) <01/07/03@12:48:43> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request) <01/07/03@12:48:44> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request) <01/07/03@12:48:45> [yp_add] yp.shoutcast.com gave error (HTTP/1.1 400 Bad Request) PlanetSoul Network Tune-in @128kbps\|32kbps

7th January 2003, 21:00	#7
global_groove6 Senior Member Join Date: Oct 2002 Location: Toronto Posts: 391	I thought the bad request was due to improper entries in the AIM ICQ and IRC entry but I'm pretty sure I have it configured properly. Tried various combinations, spaces, no spaces etc and it still wont work. PlanetSoul Network Tune-in @128kbps\|32kbps

7th January 2003, 17:44	#2
FesterHead Alumni Join Date: Sep 2001 Location: Maui, Hawaii Posts: 14,108	Does the problem exist using straight Winamp/DSP to a DNAS?

7th January 2003, 20:19	#6
Tom Moderator Join Date: Apr 2000 Posts: 4,491	If the DSP and DNAS are not on the same machine than a slow network will cause drops in the DSP. A way to avoid this is to setup a local DNAS and then set the broadcast DNAS up to relay the local DNAS. As far as the Bad Request this is due to the DSP sending improperly encoded data. Usually it is a space in your AIM, ICQ or IRC entry. Tom

30th January 2003, 01:08	#8
Swiftie Junior Member Join Date: Jan 2003 Location: United Kingdom Posts: 49	K! I've had this problem to! I've searched all over the place but no luck!! Basically, I can stream, but this is only if I use WIN AMP to play a MP3 trough the program. But as soon as I select SOUNDCARD, then Shoutcast 1.8.0 DSP goes nutty & will lock off the server after a few secs!! Any one know the reason for this?? Thanx in advance! Brgs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode