using a Netgear Router 114 can't creat a server

dmckay83 · 20th February 2003, 00:45

I'm trying to connect using my IP but i can't seem to do it because i'm connecting to the internet with a netgear router 114. how do i configure my router so that i can creat a server using only my computer?

FesterHead · 20th February 2003, 01:24

If the DNAS and Winamp/DSP combo are on the same machine, use "localhost" or "127.0.0.1" as the server ip in the DSP configuration.

If the DNAS and Winamp/DSP combo are on different machines but on the same lan, use the lan ip of the DNAS as the server ip in the DSP configuration.

If the DNAS and Winamp/DSP combo are on different lans, use the real, world-visible ip of the DNAS as the server ip in the DSP configuration.

Also, make sure the corrcts ports, portBase and portBase+1 (default portBase is 8000), are forwarded to the correct lan machine. Check your router documentation on how to forward ports.

GeraghtyJa · 20th February 2003, 04:32

open an iexplore window,
type
http://192.168.0.1
this will bring you to the admin for the router,
look under advanced/ ports, click ports, you will see a port table, forward the ports you plan to use to your pc, if you dont know what your local pc's ip addy is then look under matinence/ DHCP table,..

20th February 2003, 00:45	#1
dmckay83 Junior Member Join Date: Feb 2003 Posts: 1	using a Netgear Router 114 can't creat a server I'm trying to connect using my IP but i can't seem to do it because i'm connecting to the internet with a netgear router 114. how do i configure my router so that i can creat a server using only my computer?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

20th February 2003, 01:24	#2
FesterHead Alumni Join Date: Sep 2001 Location: Maui, Hawaii Posts: 14,108	If the DNAS and Winamp/DSP combo are on the same machine, use "localhost" or "127.0.0.1" as the server ip in the DSP configuration. If the DNAS and Winamp/DSP combo are on different machines but on the same lan, use the lan ip of the DNAS as the server ip in the DSP configuration. If the DNAS and Winamp/DSP combo are on different lans, use the real, world-visible ip of the DNAS as the server ip in the DSP configuration. Also, make sure the corrcts ports, portBase and portBase+1 (default portBase is 8000), are forwarded to the correct lan machine. Check your router documentation on how to forward ports.

20th February 2003, 04:32	#3
GeraghtyJa Senior Member Join Date: Feb 2003 Location: NYC Metro Posts: 209	open an iexplore window, type http://192.168.0.1 this will bring you to the admin for the router, look under advanced/ ports, click ports, you will see a port table, forward the ports you plan to use to your pc, if you dont know what your local pc's ip addy is then look under matinence/ DHCP table,..