Keeps cutting out

Timewell · 20th February 2003, 21:01

Hi guys!

This has probably been asked before but here goes.

I have Winamp 2.81 and SHOUTcast broadcasting thing. When I broadcast some songs they cut out with approximately 10 seconds to spare. The Crossfading thing that came with SHOUTcast or whatever and I tried to install it but not sure whether it was successful or not.

Is there any way of removing it from the output plug ins thing or to stop the tracks from cutting out at the end?

Many thanks!

Timewell

FesterHead · 20th February 2003, 21:15

Doubly wrong forum

Try this:

With Winamp the active application:
Ctrl+p -> Plug-ins -> Output -> Select something else

[Moved: WA3TS > SCTS --Sawg]

Timewell · 20th February 2003, 21:20

What do you mean by select something else? Just click on another plug in?

Timewell · 20th February 2003, 21:22

There is a NULL Output Plug-In....shall I configure that?

Timewell · 20th February 2003, 21:37

I still don't understand what you mean by selecting it. I have played a couple of tracks and it seems they still fade out/cut out. Isn't there any way of removing Crossfading?

DJ Egg · 21st February 2003, 00:15

Whichever Output plugin is hi-lighted is the active one.
DirectSound Output includes the built-in crossfader
So either choose the other Output plugin used for normal playback, ie. WaveOut
or choose Null Output to hear absolutely nothing
(this doesn't effect the Shoutcast DSP which will still be broadcasting)

Timewell · 21st February 2003, 12:31

Thanks! It works!

bbruha · 27th February 2003, 17:38

I cannot figure out how to stop cross-fading either...and I cannot figure it out by reading the suggestions in the forum. I have unselected Direct Sound Output, which doesn't make a difference.. Also, do I have to close and reopen Winamp for it to take effect?

Tom · 27th February 2003, 19:00

DirectSound output should not cause a crossfade. But to answer your question the Output plugin will take effect at the start of the next song.

Tom

Timewell · 27th February 2003, 19:52

Now it is cutting out again.

I'm not sure but I think it could be because my Bitrate is set too high. I am Broadcasting now, Radio Timewell, can you tell me whether it does cut out or not? It works when I listened to it. But still not sure...thanks!

bbruha · 27th February 2003, 20:07

It is still cutting out. I deinstalled Winamp, re-installed it with custom option instead of typical, and unchecked crossfade, and it's still crossfading. The string of steps in an earlier post don't make sense with the control options that I have. After "Tom's" reply, I tried to conform to that, then just kept trying different "output" options but the more option changes I tried, the sooner it started cutting out. Any other suggestions?

Thanks!

Tom · 27th February 2003, 21:17

bbruha,
Are you a listener or broadcaster? What version of Winamp are you using?

Timewell,
Your station was not up when I checked.

Tom

20th February 2003, 21:01	#1
Timewell Junior Member Join Date: Feb 2003 Posts: 22	Keeps cutting out Hi guys! This has probably been asked before but here goes. I have Winamp 2.81 and SHOUTcast broadcasting thing. When I broadcast some songs they cut out with approximately 10 seconds to spare. The Crossfading thing that came with SHOUTcast or whatever and I tried to install it but not sure whether it was successful or not. Is there any way of removing it from the output plug ins thing or to stop the tracks from cutting out at the end? Many thanks! Timewell

21st February 2003, 00:15	#6
DJ Egg Techorator Winamp & Shoutcast Team Join Date: Jun 2000 Posts: 35,894	Whichever Output plugin is hi-lighted is the active one. DirectSound Output includes the built-in crossfader So either choose the other Output plugin used for normal playback, ie. WaveOut or choose Null Output to hear absolutely nothing (this doesn't effect the Shoutcast DSP which will still be broadcasting) Playlist -\|- Twitter

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

20th February 2003, 21:15	#2
FesterHead Alumni Join Date: Sep 2001 Location: Maui, Hawaii Posts: 14,108	Doubly wrong forum Try this: With Winamp the active application: Ctrl+p -> Plug-ins -> Output -> Select something else [Moved: WA3TS > SCTS --Sawg]

20th February 2003, 21:20	#3
Timewell Junior Member Join Date: Feb 2003 Posts: 22	What do you mean by select something else? Just click on another plug in?

20th February 2003, 21:22	#4
Timewell Junior Member Join Date: Feb 2003 Posts: 22	There is a NULL Output Plug-In....shall I configure that?

20th February 2003, 21:37	#5
Timewell Junior Member Join Date: Feb 2003 Posts: 22	I still don't understand what you mean by selecting it. I have played a couple of tracks and it seems they still fade out/cut out. Isn't there any way of removing Crossfading?

21st February 2003, 12:31	#7
Timewell Junior Member Join Date: Feb 2003 Posts: 22	Thanks! It works!

27th February 2003, 17:38	#8
bbruha Junior Member Join Date: Feb 2003 Posts: 2	I cannot figure out how to stop cross-fading either...and I cannot figure it out by reading the suggestions in the forum. I have unselected Direct Sound Output, which doesn't make a difference.. Also, do I have to close and reopen Winamp for it to take effect?

27th February 2003, 19:00	#9
Tom Moderator Join Date: Apr 2000 Posts: 4,491	DirectSound output should not cause a crossfade. But to answer your question the Output plugin will take effect at the start of the next song. Tom

27th February 2003, 19:52	#10
Timewell Junior Member Join Date: Feb 2003 Posts: 22	Now it is cutting out again. I'm not sure but I think it could be because my Bitrate is set too high. I am Broadcasting now, Radio Timewell, can you tell me whether it does cut out or not? It works when I listened to it. But still not sure...thanks!

27th February 2003, 20:07	#11
bbruha Junior Member Join Date: Feb 2003 Posts: 2	It is still cutting out. I deinstalled Winamp, re-installed it with custom option instead of typical, and unchecked crossfade, and it's still crossfading. The string of steps in an earlier post don't make sense with the control options that I have. After "Tom's" reply, I tried to conform to that, then just kept trying different "output" options but the more option changes I tried, the sooner it started cutting out. Any other suggestions? Thanks!

27th February 2003, 21:17	#12
Tom Moderator Join Date: Apr 2000 Posts: 4,491	bbruha, Are you a listener or broadcaster? What version of Winamp are you using? Timewell, Your station was not up when I checked. Tom