Error 10060

Nogeeknbm · 8th October 2005, 01:58

new to forum and reading like crazy and yes, i did do a search on this topic but found the answers difficult to understand or better yet, the solution seemed to elude me
i had no problems connecting to shoutcast server before and have used shoutcast for some time now
today, when i tried to connect, i continue to get ERROR 10060 and it will not connect
i have not changed anything in my settings and cannot figure out why this is happening
as i mentioned, i did read through forums so any additional information or who to contact would be grateful
thanks in advance to any and all who reply

Nogeeknbm · 8th October 2005, 03:03

i changed server IP on encoder from my IP address to localhost and then it connected no problem although it used to be my personal IP address and that connected fine as well although now it does not
i then changed my statistics relay to localhost for host and kept the password the same as what is in the read me file but it doesn't make sense how i never changed anything in settings and it ran off my IP address and now won't even connect, please advise
do i need to change anything in winamp under preferences? will station open in windows media player? thanks again in advance

Nogeeknbm · 8th October 2005, 03:05

error 606-at least one relay is using a local network IP address. Please use an internal IP address.
why am i getting that error, although connected now, in event log area??
i HAVE checked forums for answers and sticky tabs as well but have not found anything i understand or can use

djSpinnerCee · 8th October 2005, 03:26

How do you "know" what your IP is? How are you finding it out?

All I can say is the IP may not be what you think it is now -- every reboot of a PC could give it a new IP unless you have taken steps (config a static IP) to make sure that it always has the same IP.

ipconfig /all can tell you what the PCs IP is right now -- do not use a web utility to determine a PCs IP.

Every PC has 127.0.0.1 (localhost) but that pseudo IP just means "myself." It cannot be used (won't work) to communicate past the local PC.

Nogeeknbm · 8th October 2005, 04:43

DUH DUH, dude, that rules, i presumed having cable modem would mean same ip all the time but checked whatismyip.com and viola, different IP and all is well again, thanks so much, a million danke's, that's german and stuff haha

8th October 2005, 01:58	#1
Nogeeknbm Junior Member Join Date: Oct 2005 Posts: 4	Error 10060 new to forum and reading like crazy and yes, i did do a search on this topic but found the answers difficult to understand or better yet, the solution seemed to elude me i had no problems connecting to shoutcast server before and have used shoutcast for some time now today, when i tried to connect, i continue to get ERROR 10060 and it will not connect i have not changed anything in my settings and cannot figure out why this is happening as i mentioned, i did read through forums so any additional information or who to contact would be grateful thanks in advance to any and all who reply

8th October 2005, 03:26	#4
djSpinnerCee Forum King Join Date: Aug 2004 Location: Hollis, Queens/The Bronx, NYC Posts: 3,555	How do you "know" what your IP is? How are you finding it out? All I can say is the IP may not be what you think it is now -- every reboot of a PC could give it a new IP unless you have taken steps (config a static IP) to make sure that it always has the same IP. ipconfig /all can tell you what the PCs IP is right now -- do not use a web utility to determine a PCs IP. Every PC has 127.0.0.1 (localhost) but that pseudo IP just means "myself." It cannot be used (won't work) to communicate past the local PC. /* v2 HTML5 / Player test pages DigitalMixNYC, DigitalMixNYCbx \| DNAS Status: Now Playing js codes (scaststatus_X.php) \| PortForward.com \| Upload/Download Speed Test \| No-IP.com: Free Dynamic DNS \| In the YP \| dnasDir */

8th October 2005, 04:43	#5
Nogeeknbm Junior Member Join Date: Oct 2005 Posts: 4	duh DUH DUH, dude, that rules, i presumed having cable modem would mean same ip all the time but checked whatismyip.com and viola, different IP and all is well again, thanks so much, a million danke's, that's german and stuff haha

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

8th October 2005, 03:03	#2
Nogeeknbm Junior Member Join Date: Oct 2005 Posts: 4	i changed server IP on encoder from my IP address to localhost and then it connected no problem although it used to be my personal IP address and that connected fine as well although now it does not i then changed my statistics relay to localhost for host and kept the password the same as what is in the read me file but it doesn't make sense how i never changed anything in settings and it ran off my IP address and now won't even connect, please advise do i need to change anything in winamp under preferences? will station open in windows media player? thanks again in advance

8th October 2005, 03:05	#3
Nogeeknbm Junior Member Join Date: Oct 2005 Posts: 4	error 606-at least one relay is using a local network IP address. Please use an internal IP address. why am i getting that error, although connected now, in event log area?? i HAVE checked forums for answers and sticky tabs as well but have not found anything i understand or can use