2 Shoutcast 2 Server

dannidj · 31st May 2013, 09:19

Hi. I am woondering if i can not run 2 Shoutcast 2 Server's on my Windows Computer?
When i try to run 2 i get this Error.
logger could not open file C:\Users\DJDANN~1\AppData\Local\Temp\sc_serv.log
Can i not run 2 Server's on one Windows Computer?

DrO · 31st May 2013, 10:53

change 'logifile' in one (or both) of the configuration files to be different from the defaults (http://wiki.winamp.com/wiki/SHOUTcas...rver_2#Logging)

dannidj · 31st May 2013, 11:26

So i would have it like this?
logfile=logsL:\SHOUTcast2\New Music Server\SHOUTcast\logs\sc_serv.log
or?

DrO · 31st May 2013, 11:31

yes. or use a relative path e.g. logfile=logs\sc_serv.log

dannidj · 31st May 2013, 11:40

i have tryed that and i always get the same error.
Here is my basic Config File.
Did i do it right?

PHP Code:


			
songhistory=20

namelookups=1

maxuser=1000



; NOTE: for any relative paths specified are relative to

; sc_trans and not to where the conf file is being stored





; here we will setup where the log and other related files

; will be stored. make sure that these folders exist else

; sc_trans will throw an error and will close itself down.

logfile=L:/SHOUTcast2/New Music Server/SCTrans/logs2/sc_trans.log

screenlog=0





; for the purpose of this test then we will not take into

; account the use of a calendar.xml file and so disable it

calendarrewrite=0





unlockkeyname=Daniel Hrafnkelsson

unlockkeycode=*****************



; for testing we will only setup a single encoder though it

; is easy to add in additional encoder configurations and

; we are using an aac plus encoder as the default due to

; the licensing requirements for mp3 encoding as detailed

; in sc_trans.txt - section 2.5).

encoder_1=mp3

bitrate_1=128000





; this is where we define the details required for sc_trans

; to connect to the sc_serv instance being used where the

; details must match those specified in sc_serv_basic.conf

outprotocol_1=1

serverip_1=194.144.112.159

; default is 8000, if not change to sc_serv's 'portbase'

serverport_1=8000

; this is the same as 'password' in sc_serv_basic.conf

password_1=****

; this is the same as 'streamid' in sc_serv_basic.conf for

; the stream we are acting as the source for 

streamid_1=1

; this is a name for the source we're creating and is used

; with the AJAX control api or can be left blank to get a

; generic name created in the form of 'endpointX' where 'X'

; is the index of the created source from sc_trans lists.

endpointname_2=/stream.mp3





; here you would provide any information to fill in details

; provided to clients about the stream. it us upto you what

; is entered though do not do anything which will annoy, etc

streamtitle=Fyndin Og Mistok

streamurl=http://www.fyndinogmistok.com

genre=Misc





; here we specify a playlist to use as the master list from

; which to play files from.

playlistfile=playlists\main.lst





; these options will allow you access the admin interfaces

; of sc_trans though also allows the 'testui' example to be

; accessed. remember to change the password, etc as needed

adminport=7999

adminuser=admin

adminpassword=******



songhistory=20

namelookups=1





; if we want to have an intro file for when the client gets

; the stream or a backup file incase of our connection to

; the server failing then we can set these. this is needed

; as we are using 'outprotocol=3' which supports this (and

; is needed in place of the sc_serv defined values to work)

;serverintrofile=<specify_intro_filepath>

;serverbackupfile=<specify_backup_filepath>

DrO · 31st May 2013, 11:43

what has a sc_trans config file got anything to do with sc_serv ?

dannidj · 31st May 2013, 11:45

Here is the right file

PHP Code:


			
songhistory=20

namelookups=1

maxuser=1000



; NOTE: for any relative paths specified are relative to

; sc_serv and not to where the conf file is being stored



; here we will setup where the log and other related files

; will be stored. make sure that these folders exist else

; sc_serv will throw an error and will close itself down.

; we will make the logs save to the sc_serv2 directory

logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log

w3clog=logs\sc_w3c.log

banfile=control\sc_serv.ban

ripfile=control\sc_serv.rip





; for testing we will make the server only work locally

; (i.e. localhost / 127.0.0.1) though if this is left out

; or set to publicserver=always then we attempt to make a

; connection to the YP for listing - do not forget to add

; in a 'streamauthhash' value for any public streams made

publicserver=always





; if you're wanting to use a different port to use for any

; connections then you can use this option e.g. to use 80

; otherwise port 8000 is used as the default to listen on.

portbase=8500



; password used by sc_trans or the Winamp dsp plug-in

; NOTE: remember to change this to something else

password=****





; password used for accessing the administation pages

; NOTE: remember to change this to something else

adminpassword=******





; now we will specify the details of the stream we're going

; to serve which can be done as follows

streamid=1

streampath=/test.mp3



; or



; it can be done like this which is how it needs to be done

; if you are going to provide multiple streams from sc_serv

streamid_1=1

streampath_1=/stream.mp3

;streamid_2=2

;streampath_2=/test2.aac

DrO · 31st May 2013, 11:51

then do the same for sc_trans.

dannidj · 31st May 2013, 11:52

but is the config file ok if i cam gonna start anothere server?

dannidj · 1st June 2013, 10:18

I have tryed to have the config file like this
logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log
but still i get this error. Wuy is that?

DrO · 1st June 2013, 12:35

i don't know as you keep posting the wrong information (talking about one tool and then switching to another) or just nothing of use to help determine the issue (as seems to be your style based on previous posts).

as i don't know if the paths you're specifying even exist (as the DNAS will not create folder paths so you have to ensure the folder exists) or quite how you've got things setup. or even you're setting the path to the same folder in both / all instances - every instance has to have it's OWN log file location.

so check the folder paths exist and use relative paths as i have said (unless you're running them as a daemon / service then you have to use fully qualified paths).

dannidj · 1st June 2013, 12:59

Whell here is the config file that's i am talking about.

PHP Code:


			
songhistory=20

namelookups=1

maxuser=1000



; NOTE: for any relative paths specified are relative to

; sc_serv and not to where the conf file is being stored



; here we will setup where the log and other related files

; will be stored. make sure that these folders exist else

; sc_serv will throw an error and will close itself down.

; we will make the logs save to the sc_serv2 directory

logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log

w3clog=logssc_w3c.log

banfile=controlsc_serv.ban

ripfile=controlsc_serv.rip





; for testing we will make the server only work locally

; (i.e. localhost / 127.0.0.1) though if this is left out

; or set to publicserver=always then we attempt to make a

; connection to the YP for listing - do not forget to add

; in a 'streamauthhash' value for any public streams made

publicserver=always





; if you're wanting to use a different port to use for any

; connections then you can use this option e.g. to use 80

; otherwise port 8000 is used as the default to listen on.

portbase=8500



; password used by sc_trans or the Winamp dsp plug-in

; NOTE: remember to change this to something else

password=****





; password used for accessing the administation pages

; NOTE: remember to change this to something else

adminpassword=******





; now we will specify the details of the stream we're going

; to serve which can be done as follows

streamid=1

streampath=/test.mp3



; or



; it can be done like this which is how it needs to be done

; if you are going to provide multiple streams from sc_serv

streamid_1=1

streampath_1=/stream.mp3

;streamid_2=2

;streampath_2=/test2.aac

logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log
When i do it like this i still get the same error. What am i dooing wrong?

31st May 2013, 09:19	#1
dannidj Senior Member Join Date: Jul 2004 Posts: 390	2 Shoutcast 2 Server Hi. I am woondering if i can not run 2 Shoutcast 2 Server's on my Windows Computer? When i try to run 2 i get this Error. logger could not open file C:\Users\DJDANN~1\AppData\Local\Temp\sc_serv.log Can i not run 2 Server's on one Windows Computer?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

31st May 2013, 10:53	#2
DrO Join Date: Sep 2003 Posts: 27,873	change 'logifile' in one (or both) of the configuration files to be different from the defaults (http://wiki.winamp.com/wiki/SHOUTcas...rver_2#Logging)

31st May 2013, 11:26	#3
dannidj Senior Member Join Date: Jul 2004 Posts: 390	So i would have it like this? logfile=logsL:\SHOUTcast2\New Music Server\SHOUTcast\logs\sc_serv.log or?

31st May 2013, 11:31	#4
DrO Join Date: Sep 2003 Posts: 27,873	yes. or use a relative path e.g. logfile=logs\sc_serv.log

31st May 2013, 11:40	#5
dannidj Senior Member Join Date: Jul 2004 Posts: 390	i have tryed that and i always get the same error. Here is my basic Config File. Did i do it right? PHP Code: songhistory=20 namelookups=1 maxuser=1000 ; NOTE: for any relative paths specified are relative to ; sc_trans and not to where the conf file is being stored ; here we will setup where the log and other related files ; will be stored. make sure that these folders exist else ; sc_trans will throw an error and will close itself down. logfile=L:/SHOUTcast2/New Music Server/SCTrans/logs2/sc_trans.log screenlog=0 ; for the purpose of this test then we will not take into ; account the use of a calendar.xml file and so disable it calendarrewrite=0 unlockkeyname=Daniel Hrafnkelsson unlockkeycode=*************** ; for testing we will only setup a single encoder though it ; is easy to add in additional encoder configurations and ; we are using an aac plus encoder as the default due to ; the licensing requirements for mp3 encoding as detailed ; in sc_trans.txt - section 2.5). encoder_1=mp3 bitrate_1=128000 ; this is where we define the details required for sc_trans ; to connect to the sc_serv instance being used where the ; details must match those specified in sc_serv_basic.conf outprotocol_1=1 serverip_1=194.144.112.159 ; default is 8000, if not change to sc_serv's 'portbase' serverport_1=8000 ; this is the same as 'password' in sc_serv_basic.conf password_1= ; this is the same as 'streamid' in sc_serv_basic.conf for ; the stream we are acting as the source for streamid_1=1 ; this is a name for the source we're creating and is used ; with the AJAX control api or can be left blank to get a ; generic name created in the form of 'endpointX' where 'X' ; is the index of the created source from sc_trans lists. endpointname_2=/stream.mp3 ; here you would provide any information to fill in details ; provided to clients about the stream. it us upto you what ; is entered though do not do anything which will annoy, etc streamtitle=Fyndin Og Mistok streamurl=http://www.fyndinogmistok.com genre=Misc ; here we specify a playlist to use as the master list from ; which to play files from. playlistfile=playlists\main.lst ; these options will allow you access the admin interfaces ; of sc_trans though also allows the 'testui' example to be ; accessed. remember to change the password, etc as needed adminport=7999 adminuser=admin adminpassword=**** songhistory=20 namelookups=1 ; if we want to have an intro file for when the client gets ; the stream or a backup file incase of our connection to ; the server failing then we can set these. this is needed ; as we are using 'outprotocol=3' which supports this (and ; is needed in place of the sc_serv defined values to work) ;serverintrofile=<specify_intro_filepath> ;serverbackupfile=<specify_backup_filepath>

31st May 2013, 11:43	#6
DrO Join Date: Sep 2003 Posts: 27,873	what has a sc_trans config file got anything to do with sc_serv ?

31st May 2013, 11:45	#7
dannidj Senior Member Join Date: Jul 2004 Posts: 390	Here is the right file PHP Code: songhistory=20 namelookups=1 maxuser=1000 ; NOTE: for any relative paths specified are relative to ; sc_serv and not to where the conf file is being stored ; here we will setup where the log and other related files ; will be stored. make sure that these folders exist else ; sc_serv will throw an error and will close itself down. ; we will make the logs save to the sc_serv2 directory logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log w3clog=logs\sc_w3c.log banfile=control\sc_serv.ban ripfile=control\sc_serv.rip ; for testing we will make the server only work locally ; (i.e. localhost / 127.0.0.1) though if this is left out ; or set to publicserver=always then we attempt to make a ; connection to the YP for listing - do not forget to add ; in a 'streamauthhash' value for any public streams made publicserver=always ; if you're wanting to use a different port to use for any ; connections then you can use this option e.g. to use 80 ; otherwise port 8000 is used as the default to listen on. portbase=8500 ; password used by sc_trans or the Winamp dsp plug-in ; NOTE: remember to change this to something else password=** ; password used for accessing the administation pages ; NOTE: remember to change this to something else adminpassword=**** ; now we will specify the details of the stream we're going ; to serve which can be done as follows streamid=1 streampath=/test.mp3 ; or ; it can be done like this which is how it needs to be done ; if you are going to provide multiple streams from sc_serv streamid_1=1 streampath_1=/stream.mp3 ;streamid_2=2 ;streampath_2=/test2.aac

31st May 2013, 11:51	#8
DrO Join Date: Sep 2003 Posts: 27,873	then do the same for sc_trans.

31st May 2013, 11:52	#9
dannidj Senior Member Join Date: Jul 2004 Posts: 390	but is the config file ok if i cam gonna start anothere server?

1st June 2013, 10:18	#10
dannidj Senior Member Join Date: Jul 2004 Posts: 390	I have tryed to have the config file like this logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log but still i get this error. Wuy is that?

1st June 2013, 12:35	#11
DrO Join Date: Sep 2003 Posts: 27,873	i don't know as you keep posting the wrong information (talking about one tool and then switching to another) or just nothing of use to help determine the issue (as seems to be your style based on previous posts). as i don't know if the paths you're specifying even exist (as the DNAS will not create folder paths so you have to ensure the folder exists) or quite how you've got things setup. or even you're setting the path to the same folder in both / all instances - every instance has to have it's OWN log file location. so check the folder paths exist and use relative paths as i have said (unless you're running them as a daemon / service then you have to use fully qualified paths).

1st June 2013, 12:59	#12
dannidj Senior Member Join Date: Jul 2004 Posts: 390	Whell here is the config file that's i am talking about. PHP Code: songhistory=20 namelookups=1 maxuser=1000 ; NOTE: for any relative paths specified are relative to ; sc_serv and not to where the conf file is being stored ; here we will setup where the log and other related files ; will be stored. make sure that these folders exist else ; sc_serv will throw an error and will close itself down. ; we will make the logs save to the sc_serv2 directory logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log w3clog=logssc_w3c.log banfile=controlsc_serv.ban ripfile=controlsc_serv.rip ; for testing we will make the server only work locally ; (i.e. localhost / 127.0.0.1) though if this is left out ; or set to publicserver=always then we attempt to make a ; connection to the YP for listing - do not forget to add ; in a 'streamauthhash' value for any public streams made publicserver=always ; if you're wanting to use a different port to use for any ; connections then you can use this option e.g. to use 80 ; otherwise port 8000 is used as the default to listen on. portbase=8500 ; password used by sc_trans or the Winamp dsp plug-in ; NOTE: remember to change this to something else password=** ; password used for accessing the administation pages ; NOTE: remember to change this to something else adminpassword=**** ; now we will specify the details of the stream we're going ; to serve which can be done as follows streamid=1 streampath=/test.mp3 ; or ; it can be done like this which is how it needs to be done ; if you are going to provide multiple streams from sc_serv streamid_1=1 streampath_1=/stream.mp3 ;streamid_2=2 ;streampath_2=/test2.aac logfile=L:/SHOUTcast2/New Music Server/SHOUTcast/logs/sc_serv.log When i do it like this i still get the same error. What am i dooing wrong?