|
|||||||
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
|
|
#1 |
|
Junior Member
Join Date: Jul 2016
Posts: 8
|
Set appropriate max user number in Shoutcast DNAS server
Greetings
I have installed Shoutcast in a VPS, and i want to know what would be the appropriate number of users that would allowed my VPS. Here are the details: 1 vCPU Core Intel Xeon E5-2650L*v4 1GB Memory 20GB SSD Disk 2TB Transfer I'm planning on transmiting with Winamp DSP plugin, MP3@128Kbps. Thank you. |
|
|
|
|
|
#2 |
|
Member
Join Date: Feb 2017
Location: Germany
Posts: 58
|
Hi,
a VPS with traffic limitation I think it's bad (the most host provider have the "Fair Use" traffic flat => Streaming not allowed in Fair Use (only info). See: With your 20 TB traffic limit: - (128 Kbit/s / 8) = 16 KB per second - 16 KB * 60 = 960 KB / minute - 960 KB * 60 = 57.600 KB / hour - 57.600 KB * 24 = 1.382.400 KB / day - 1.382.400 KB * 30 = 41.472.000 KB / 30 days Now change in GB: 39.55 GB for 1 listener per 30 days by listening 24/7 (I calculate always the worst case). - 20 TB = 20.480 GB - 20.480 GB / 39,55 GB = Max. 517 listener (for 30 days and very active listeners). Maybe setup lower value for security reasons (not that your stream is offline because you reached the TL.
|
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Dec 2016
Posts: 20
|
Hello,
I am running Shoutcast on the following VPS: Centos 6 2 core CPU 2G memory 20TB bandwidth 1Gb Nic I find that the cpu usage (using top command) goes to 100% at about 800 listeners. You would need to check the speed of the network card, doing a rough calculation at 100M card will allow max of 800 listeners (100Mbs /128kbs) - not sure if this is correct but sort of sounds correct. Hope that helps you! |
|
|
|
![]() |
|
|||||||
| Thread Tools | Search this Thread |
| Display Modes | |
|
|