Connecting to linux?

[CryPhoenix]

I've setup the DSP plug in and and sc server on my linux box and radiotoolbox says that my server's running but people can't seem to connect... Can anyone help me out?



http://12.236.95.147:9000/listen.pls
http://timpowers.no-ip.info:9000/listen.pls (this should work now too)

[FesterHead]

http://12.236.95.147:9000 -> Server Status: Server is currently down.

Fix: Send the DNAS a source.

This is most commonly done with a Winamp/DSP combo from a Windows box or sc_trans from a linux box.

[CryPhoenix]

I'm using sc_trans, and it appears to be running properly... although apparently not. I'll try and see if there's something wrong with my server config file...

[CryPhoenix]

[arklinux@localhost shoutcast-1-9-2-linux-glibc6]$ ./sc_serv
*******************************************************************************
** SHOUTcast Distributed Network Audio Server
** Copyright (C) 1998-2000 Nullsoft, Inc. All Rights Reserved.
** Use "sc_serv filename.ini" to specify an ini file.
*******************************************************************************

Event log:
<09/02/03@16:46:42> [SHOUTcast] DNAS/Linux v1.9.2 (Nov 25 2002) starting up...
<09/02/03@16:46:42> [main] pid: 2375
<09/02/03@16:46:42> [main] loaded config from sc_serv.conf
<09/02/03@16:46:42> [main] initializing (usermax:5 portbase:9000)...
<09/02/03@16:46:42> [main] No ban file found (sc_serv.ban)
<09/02/03@16:46:42> [main] No rip file found (sc_serv.rip)
<09/02/03@16:46:42> [main] opening source socket
<09/02/03@16:46:42> [main] source thread starting
<09/02/03@16:46:42> [main] opening client socket
<09/02/03@16:46:42> [main] Client Stream thread [0] starting
<09/02/03@16:46:42> [main] client main thread starting
<09/02/03@16:46:42> [source] listening for connection on port 9001
<09/02/03@16:46:42> [main] dns thread starting


That's the server's output while running.

[arklinux@localhost sc_trans_040]$ ./sc_trans_linux
*******************************************************************************
** TRANScast Distributed Network Audio Content Provider
** Copyright (C) 2000 Nullsoft, Inc. All Rights Reserved.
** Use "sc_trans filename.conf" to specify a config file.
*******************************************************************************
<09/02/03@16:50:19> [TRANSCast] DNAS/posix v0.400-LAME (Mar 4 2003) starting up...
<09/02/03@16:50:19> [MAIN] PID: 2388
<09/02/03@16:50:19> [MAIN] Loaded config from sc_trans.conf
<09/02/03@16:50:19> [MAIN] Loading playlist (/home/arklinux/Desktop/Downloads/sc_trans_040/example.lst)
<09/02/03@16:50:19> [MAIN] Found (2) entries in playlist
<09/02/03@16:50:19> [MAIN] Playlist decoder thread starting
<09/02/03@16:50:19> [MAIN] Streaming thread starting
<09/02/03@16:50:19> [STREAM] Creating stream socket
<09/02/03@16:50:19> [DECODE] Opened audio
<09/02/03@16:50:19> [CONFIG] WARNING: No InputSamplerate defined, assuming 44100!
<09/02/03@16:50:19> [CONFIG] WARNING: No InputChannels defined, assuming 2!

And that's the sc_trans output...

It looks fine to me... any ideas?

Edit: Ah, I'm also getting an "Error connecting to stream host message.."

[CryPhoenix]

What are the alternative methods of sending the DNAS a source? You seemed to imply that there are other methods than sc_trans...

[FesterHead]

This is most commonly done with a Winamp/DSP combo from a Windows box or sc_trans from a linux box.

I use SAM2 (Streaming Audio Manager) on a Windows box to source my DNAS.

[CryPhoenix]

But I'm not using a windows box, I'm using a Linux box.

If you know of anything that would be helpful, let me know..

*goes off to google*