Micro and title...

SirLANcelot · 16th September 2003, 12:55

Hi,

When I use Soundcard input, the listeners can hear me also when Push to talk button is not pushed...
See my settings below:

The song titles are also not displayed, but the Enable Title and Auto Update is activated...

Thx in advance for Help.

Sorry, but my English is not very good

X-Net Chew · 16th September 2003, 12:57

Can they barely hear you? or is it just like your holding in the talk button?

From the picture above, it looks as if your mic control isn't being dropped all the way, and that would explain why they could still hear you.

Also, I don't have my mixer setup here, (at work

) but when using the soundcard input I always set it to "what you hear" on my Soundblaster live card. And then you'll find that the SC source should work correctly.

Chew

SirLANcelot · 16th September 2003, 13:03

They hear me all the time, also when I don't push the button... what should I do??

X-Net Chew · 16th September 2003, 13:12

change your selected record source to "Stereo Mixer"

Chew

SirLANcelot · 16th September 2003, 13:34

Thx, I think it's ok now, just waiting for a test listener

...
But what about he song titles?? They r not shown...

X-Net Chew · 16th September 2003, 14:11

well you need to turn on title updates.

Chew

FesterHead · 16th September 2003, 15:48

Since you're in soundcard input mode, you'll either need to:

1: Update the titles manually via
http://IP:PORT/admin.cgi?pass=PASSWORD&mode=updinfo&song=INFO

2: Try MP3Toolbox

16th September 2003, 12:55	#1
SirLANcelot Junior Member Join Date: Sep 2003 Posts: 3	Micro and title... Hi, When I use Soundcard input, the listeners can hear me also when Push to talk button is not pushed... See my settings below: The song titles are also not displayed, but the Enable Title and Auto Update is activated... Thx in advance for Help. Sorry, but my English is not very good

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16th September 2003, 12:57	#2
X-Net Chew Member Join Date: Sep 2003 Posts: 63	Can they barely hear you? or is it just like your holding in the talk button? From the picture above, it looks as if your mic control isn't being dropped all the way, and that would explain why they could still hear you. Also, I don't have my mixer setup here, (at work ) but when using the soundcard input I always set it to "what you hear" on my Soundblaster live card. And then you'll find that the SC source should work correctly. Chew

16th September 2003, 13:03	#3
SirLANcelot Junior Member Join Date: Sep 2003 Posts: 3	They hear me all the time, also when I don't push the button... what should I do??

16th September 2003, 13:12	#4
X-Net Chew Member Join Date: Sep 2003 Posts: 63	change your selected record source to "Stereo Mixer" Chew

16th September 2003, 13:34	#5
SirLANcelot Junior Member Join Date: Sep 2003 Posts: 3	Thx, I think it's ok now, just waiting for a test listener ... But what about he song titles?? They r not shown...

16th September 2003, 14:11	#6
X-Net Chew Member Join Date: Sep 2003 Posts: 63	well you need to turn on title updates. Chew

16th September 2003, 15:48	#7
FesterHead Alumni Join Date: Sep 2001 Location: Maui, Hawaii Posts: 14,108	Since you're in soundcard input mode, you'll either need to: 1: Update the titles manually via http://IP:PORT/admin.cgi?pass=PASSWORD&mode=updinfo&song=INFO 2: Try MP3Toolbox