Problem with server

-=Amsterdam=- · 11th December 2003, 16:56

Hello,
I have already a Xitami Webserver running on port 80... Can i also run a Shoutcast server to broadcast music?

jackherer · 11th December 2003, 16:57

Yes you just need to run it on a port other than 80. Leaving it at the default setting of 8000 will work fine so long as their is nothing else running on port 8000

-=Amsterdam=- · 11th December 2003, 17:08

Hmmzzz... There's nothing running on port 8000, but when i put in that port in config, it automatically takes port 8001... So i gave access to port 8001 on my router! The DSP plugin is sending a lot of bytes, but when i put in http://(my ip number):8000 it won't do anything... and :8001 doesn't work either!

FesterHead · 11th December 2003, 17:32

if your router doesn't support local loopback then machines on the same lan as the DNAS (you) need to use the lan ip of the DNAS to connect/listen.

-=Amsterdam=- · 11th December 2003, 21:44

Hey it works! I've made it possible for the server to access ports 8000 & 8001, used the IP of the server (on the lan) and it works! I only have a very slow connection right now

but that doesn't mind!

Thankz!

11th December 2003, 16:56	#1
-=Amsterdam=- Junior Member Join Date: Dec 2003 Location: Amsterdam Posts: 3	Problem with server Hello, I have already a Xitami Webserver running on port 80... Can i also run a Shoutcast server to broadcast music?

11th December 2003, 16:57	#2
jackherer Major Dude Join Date: Aug 2003 Posts: 942	Yes you just need to run it on a port other than 80. Leaving it at the default setting of 8000 will work fine so long as their is nothing else running on port 8000 Do not PM me for tech support !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11th December 2003, 17:08	#3
-=Amsterdam=- Junior Member Join Date: Dec 2003 Location: Amsterdam Posts: 3	Hmmzzz... There's nothing running on port 8000, but when i put in that port in config, it automatically takes port 8001... So i gave access to port 8001 on my router! The DSP plugin is sending a lot of bytes, but when i put in http://(my ip number):8000 it won't do anything... and :8001 doesn't work either!

11th December 2003, 17:32	#4
FesterHead Alumni Join Date: Sep 2001 Location: Maui, Hawaii Posts: 14,108	if your router doesn't support local loopback then machines on the same lan as the DNAS (you) need to use the lan ip of the DNAS to connect/listen.

11th December 2003, 21:44	#5
-=Amsterdam=- Junior Member Join Date: Dec 2003 Location: Amsterdam Posts: 3	Hey it works! I've made it possible for the server to access ports 8000 & 8001, used the IP of the server (on the lan) and it works! I only have a very slow connection right now but that doesn't mind! Thankz!