Relay server help

[Triandrew2001]

well, lets get some info from you first....

YOu need RELAY SERVER help.... Are you running a server now on any machine? For your server, are you running WINDOWS or LINUX?

Very basically, make sure the server that you are going to relay FROM will allow a relay to connect. [look thru the sc_serv.ini comfiguration file to check settings.] It's under the SERVER CONFIGURATION section:

[example]
=============
; AllowRelay determines whether or not other SHOUTcast servers will be
; permitted to relay this server. The default is Yes.
AllowRelay=Yes
========================


On the server you are relaying TO, find the NETWORK CONFIGURATION section, and put in the IP and port # for the server you're relaying FROM.

[example]
===========
; RelayPort and RelayServer specify that you want to be a relay server.
; Relay servers act as clients to another server, and rebroadcast.
; Set RelayPort to 0, RelayServer to empty, or just leave these commented
; out to disable relay mode.
RelayPort=8000
RelayServer=192.168.1.58
===============

notice at the bottom of that section, the ";" was removed, and an IP and port # are now there... these are from the server you're relaying FROM.

Hope that makes sense... I'm jsut a newbie t othis myself but happenedto learn that one early.


Always, Andrew
AIM: triandrew2001
http://www.wda1.com
We Dance As One