Argh!!!

apemeat · 9th May 2006, 03:02

<05/08/06@22:00:59> [source] invalid password from.....

I've re-typed it soooo many times...

Is something setup incorrectly that might cause this over and over again?

ANY help would be greatly appreciated.

apemeat

NJK · 9th May 2006, 05:20

I take it you changed the password in the server config file into your own.
if not than do so.

the default password is "changeme"

Nick@ss · 9th May 2006, 06:25

and if you did change th server pass did you kill and restart the server?

Heres some handy tutorials to get you going

Evil Lu's Local Streaming Tutorial
Evil Lu's Fixing Nak Errors

IORSN Streaming Tutorial
IORSN Fixing Nak Errors

apemeat · 10th May 2006, 01:41

Yes... I changed that password to my own and I've even gone so far as to copy the password from the config file and paste it into the SHOUTcast Source password box.

I quickly browsed those tutorials and guides and didn't see much of anything about this...

It seems like no matter what I do, it says that the password is incorrect. Is there anything that might be triggering this beyond just the password being wrong?

apemeat

NJK · 10th May 2006, 06:39

The password can't be wrong

it's just a copy/paste job from the config file of the server

-change password , kill server , restart server , fill in password in the box called password (2e tab dsp) and it works.

apemeat · 11th May 2006, 01:11

I did that exact thing and it still comes up with the same message.

apemeat

fc*uk · 11th May 2006, 02:08

try putting in 127.0.0.1 for the address instead of localhost.

This, of course, assumes that you are streaming from the same box that you are serving from (dnas and the winamp dsp are running on the same box).

apemeat · 11th May 2006, 02:39

....Nothing....

apemeat

fc*uk · 11th May 2006, 02:52

well ....

make sure the config file you changed the password in was saved; make sure you restart the server after changing it; make sure there are no funny spaces in the dsp when you enter your password.

You could also start with a stock config, thrwo in changeme and see if that works. If that does not work, then things have really gotten hosed up. If that does work, then you have gotten something a little incorrect...

hackerdork · 11th May 2006, 04:02

did you leave the ; infront of Password or AdminPassWord? you ned to remove the ; the SEMICOLON is a comment, so if you have something like ;Password=mypassword its ignored!

Also you can not have Spaces in the password like Password=my password

Good luck.

~D

apemeat · 11th May 2006, 12:05

It works when i use "changeme" but other than that, nothing.

apemeat

Nick@ss · 11th May 2006, 12:22

please post the line of the config showing your admin password so we can have a look.

if you have removed the ; then make sure you have restarted the server also.

apemeat · 12th May 2006, 11:53

S VALUE
; CANNOT BE BLANK. Password=forumsample The
; value, and the value + 1 must

apemeat

hackerdork · 12th May 2006, 12:10

the password needs to be on a line by itself! what you posted was a comment feild. You may have not read what I all ready posted. the ; in front of anything in the sc_serv.ini file is ignored and is just a comment.

; this is a comment
Password=mypassword
AdminPassword=myadminpassword

both those lines would work
; blah blah password=newpassword

would not.

get it?

~ D

apemeat · 13th May 2006, 03:10

Alright... I've got that going now....

But.... I just have a real quick question... I'm trying to set up my Port Forward stuff and I followed all the steps for the Static Ip but now I don't know what my actual Static Ip is or how to find it...

Just wondering.... I have two computers here (routed together) and i basically only use the second one... so need I be on the "home base" computer in order for anything to happen when I type in 'http://ip.add.ress.here' ?

Right now when I type it in, it just comes up with 'This page can not be displayed'.... etc, etc....

apemeat

hackerdork · 13th May 2006, 03:59

I got a dumb question, how did you setup a STATIC address, cuz you would know what is it if you setup the computer...

start - run - cmd (gets you to a dos window)

ipconfig /all

viola!

However for sc_Serv if you have server and winamp on the same computer use ANY or 127.0.0.1 for the IP address in winamp

if you need to know what your address is on the internet side www.whatismyip.com will show you that. That internet address is for listeners and may not work for you, which is totaly normal and cool, use the address you got from ipconfig /all

Next time click on START, HELP in windows and it will walk you through windows networking setup, and google too..

Good luck

~ D

9th May 2006, 03:02	#1
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	Argh!!! <05/08/06@22:00:59> [source] invalid password from..... I've re-typed it soooo many times... Is something setup incorrectly that might cause this over and over again? ANY help would be greatly appreciated. apemeat

9th May 2006, 05:20	#2
NJK FRISIAN (MOD) Join Date: Sep 2003 Location: in a house Posts: 16,103	I take it you changed the password in the server config file into your own. if not than do so. the default password is "changeme" Each Thursday a new show on Celtica Radio with Darkwave music. WINAMP SHOUTCAST

9th May 2006, 06:25	#3
Nick@ss Moderator Join Date: Nov 2004 Location: Streamsolutions Headquarters Posts: 11,953	and if you did change th server pass did you kill and restart the server? Heres some handy tutorials to get you going Evil Lu's Local Streaming Tutorial Evil Lu's Fixing Nak Errors IORSN Streaming Tutorial IORSN Fixing Nak Errors www.streamsolutions.co.uk SHOUTcast \| Flash Media \| Windows Media \| Icecast 2 \| Content Delivery \|

10th May 2006, 06:39	#5
NJK FRISIAN (MOD) Join Date: Sep 2003 Location: in a house Posts: 16,103	The password can't be wrong it's just a copy/paste job from the config file of the server -change password , kill server , restart server , fill in password in the box called password (2e tab dsp) and it works. Each Thursday a new show on Celtica Radio with Darkwave music. WINAMP SHOUTCAST

11th May 2006, 02:08	#7
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	try putting in 127.0.0.1 for the address instead of localhost. This, of course, assumes that you are streaming from the same box that you are serving from (dnas and the winamp dsp are running on the same box). Trancectro/electro-house/electro \| Are You Hard?

10th May 2006, 01:41	#4
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	Yes... I changed that password to my own and I've even gone so far as to copy the password from the config file and paste it into the SHOUTcast Source password box. I quickly browsed those tutorials and guides and didn't see much of anything about this... It seems like no matter what I do, it says that the password is incorrect. Is there anything that might be triggering this beyond just the password being wrong? apemeat

11th May 2006, 01:11	#6
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	I did that exact thing and it still comes up with the same message. apemeat

11th May 2006, 02:39	#8
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	....Nothing.... apemeat

11th May 2006, 02:52	#9
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	well .... make sure the config file you changed the password in was saved; make sure you restart the server after changing it; make sure there are no funny spaces in the dsp when you enter your password. You could also start with a stock config, thrwo in changeme and see if that works. If that does not work, then things have really gotten hosed up. If that does work, then you have gotten something a little incorrect... Trancectro/electro-house/electro \| Are You Hard?

11th May 2006, 04:02	#10
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	did you leave the ; infront of Password or AdminPassWord? you ned to remove the ; the SEMICOLON is a comment, so if you have something like ;Password=mypassword its ignored! Also you can not have Spaces in the password like Password=my password Good luck. ~D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

11th May 2006, 12:05	#11
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	It works when i use "changeme" but other than that, nothing. apemeat

11th May 2006, 12:22	#12
Nick@ss Moderator Join Date: Nov 2004 Location: Streamsolutions Headquarters Posts: 11,953	please post the line of the config showing your admin password so we can have a look. if you have removed the ; then make sure you have restarted the server also. www.streamsolutions.co.uk SHOUTcast \| Flash Media \| Windows Media \| Icecast 2 \| Content Delivery \|

12th May 2006, 11:53	#13
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	S VALUE ; CANNOT BE BLANK. Password=forumsample The ; value, and the value + 1 must apemeat

12th May 2006, 12:10	#14
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	the password needs to be on a line by itself! what you posted was a comment feild. You may have not read what I all ready posted. the ; in front of anything in the sc_serv.ini file is ignored and is just a comment. ; this is a comment Password=mypassword AdminPassword=myadminpassword both those lines would work ; blah blah password=newpassword would not. get it? ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

13th May 2006, 03:10	#15
apemeat Junior Member Join Date: Apr 2006 Location: Rockford, IL Posts: 7	Alright... I've got that going now.... But.... I just have a real quick question... I'm trying to set up my Port Forward stuff and I followed all the steps for the Static Ip but now I don't know what my actual Static Ip is or how to find it... Just wondering.... I have two computers here (routed together) and i basically only use the second one... so need I be on the "home base" computer in order for anything to happen when I type in 'http://ip.add.ress.here' ? Right now when I type it in, it just comes up with 'This page can not be displayed'.... etc, etc.... apemeat

13th May 2006, 03:59	#16
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	I got a dumb question, how did you setup a STATIC address, cuz you would know what is it if you setup the computer... start - run - cmd (gets you to a dos window) ipconfig /all viola! However for sc_Serv if you have server and winamp on the same computer use ANY or 127.0.0.1 for the IP address in winamp if you need to know what your address is on the internet side www.whatismyip.com will show you that. That internet address is for listeners and may not work for you, which is totaly normal and cool, use the address you got from ipconfig /all Next time click on START, HELP in windows and it will walk you through windows networking setup, and google too.. Good luck ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode