Create Authhash

[mikam]

We tried emptying <> no change on the DNAS admin the "Create AuthPath" is not displayed.

I have comented the line you told to replace the enter_authhash_here otherwise i have no "Create AuthPath" link.

; streamauthhash=<enter_authhash_here>

in this case the link appears "Create AuthPath"

But when i click "Create AuthPath" i have Error Code: 466. "Parameter outside of allowed range"



2011-09-23 23:02:47 I msg:<***> Logger startup
2011-09-23 23:02:47 I msg:<***> version 2.0.0.29
2011-09-23 23:02:47 D msg:<***>
2011-09-23 23:02:47 I msg:***************************************************************
2011-09-23 23:02:47 I msg:** SHOUTcast Distributed Network Audio Server (DNAS)
2011-09-23 23:02:47 I msg:** Copyright (C) 1999-2011 Nullsoft, Inc. All Rights Reserved.
2011-09-23 23:02:47 I msg:** Use "sc_serv filename.conf" to specify a config file.
2011-09-23 23:02:47 I msg:***************************************************************
2011-09-23 23:02:47 I msg:[SHOUTcast] DNAS/posix(linux x64) v2.0.0.29 (Jul 31 2011) starting up...
2011-09-23 23:02:47 I msg:[MAIN] PID: 10884
2011-09-23 23:02:47 I msg:
2011-09-23 23:02:47 I msg:[CONFIG] Choose one of the detected config file(s) to load or
2011-09-23 23:02:47 I msg:[CONFIG] enter `x' to close this instance of the DNAS:
2011-09-23 23:02:47 I msg:[CONFIG] Note: Press `Enter' after choosing the config file.
2011-09-23 23:02:47 I msg:
2011-09-23 23:02:47 I msg:[CONFIG] [0] : sc_serv_public.conf
2011-09-23 23:02:47 I msg:[CONFIG] [1] : sc_serv_basic.conf
2011-09-23 23:02:47 I msg:[CONFIG] [2] : sc_serv_simple.conf
2011-09-23 23:02:47 I msg:[CONFIG] [3] : sc_serv_relay.conf
2011-09-23 23:02:47 I msg:[CONFIG] [4] : sc_serv_debug.conf
2011-09-23 23:02:47 I msg:
0
2011-09-23 23:02:49 I msg:[MAIN] Logger updating log file to use
2011-09-23 23:02:49 I msg:[MAIN] Loaded config from ./sc_serv_public.conf
2011-09-23 23:02:49 I msg:[MAIN] Calculated CPU count is 2
2011-09-23 23:02:49 I msg:[MAIN] Starting 2 network threads
2011-09-23 23:02:49 I msg:[MICROSERVER] Listening for connection on port 8000
2011-09-23 23:02:49 I msg:[MICROSERVER] Listening for connection on port 8001
2011-09-23 23:02:51 I msg:[SRC xxx.xx.xx.xx:21495] SHOUTcast 2 source connection.
2011-09-23 23:02:51 E msg:[DST 216.82.30.10:49852 sid=1] SHOUTcast 1 client connection rejected. Stream not available. Mozilla
2011-09-23 23:02:51 I msg:[DST 216.82.30.10:49852 sid=1] SHOUTcast 1 client connection closed (0 seconds) [Bytes: 0] Agent: `Mozilla'
2011-09-23 23:02:51 I msg:[SRC xxx.xx.xx.xx:21495] Password accepted. Stream id is 1
2011-09-23 23:02:51 E msg:[DST 216.82.30.10:53078 sid=1] SHOUTcast 1 client connection rejected. Stream not available. Mozilla
2011-09-23 23:02:51 I msg:[DST 216.82.30.10:53078 sid=1] SHOUTcast 1 client connection closed (0 seconds) [Bytes: 0] Agent: `Mozilla'
2011-09-23 23:02:52 E msg:[YP2] No authhash found for stream config #1. Aborting registering stream with YP.
2011-09-23 23:02:52 I msg:[SRC xxx.xx.xx.xx:21495 sid=1] stream configuration complete. [
type=SHOUTcast 2
mimeType=audio/mpeg
maxPayloadSize=16377
avgBitrate=96000
maxBitrate=96000
desiredBufferSize=240
minimumBufferSize=0
icyName=mysite.com
icyGenre=Misc
icyURL=http://www.mysite.com
icyPub=1
]
2011-09-23 23:03:00 E msg:[DST 216.82.30.10:50078 sid=1] SHOUTcast 1 client connection rejected. Stream not available. Mozilla
2011-09-23 23:03:00 I msg:[DST 216.82.30.10:50078 sid=1] SHOUTcast 1 client connection closed (0 seconds) [Bytes: 0] Agent: `Mozilla'

[mikam]

By reducing the ammount of characters in the description the "Generate AuthPath" does finally the work checked in the conf file.

Now we click the listen link we have "test.aac" opens in itunes but no sound still...

by putting http://www.mysite.com:8000/mp3.mp3 in stead of test.aac
we got sound now

But still an error :/
Server SC_SERV
Socket error while waiting to send data. err=Broken pipe(32)

Thanks in advance of your first reply! that was fast

[mitchel64]

Originally Posted by mikam

By reducing the ammount of characters in the description the "Generate AuthPath" does finally the work checked in the conf file.

Now we click the listen link we have "test.aac" opens in itunes but no sound still...

by putting http://www.mysite.com:8000/mp3.mp3 in stead of test.aac
we got sound now

But still an error :/
Server SC_SERV
Socket error while waiting to send data. err=Broken pipe(32)

Thanks in advance of your first reply! that was fast

Impressive！Thanks for the post