SHOUTcast Ports

Cande · 24th November 2013, 15:49

Hello Haz2k,
you can check the ports in Shoutcast DNAS' configuration file you are using (usually "sc_serv_basic.conf").
If you didn't change anything, standard TCP ports are 8000 and 8001.

If you are running sc_serv on a machine within your LAN, you need to configure NAT (Network Address Translation) on your router in order to redirect TCP ports 8000 and 8001 (or whatever you are using) to its internal (LAN) IP address.
Modern routers auto create firewall rules for NAT, but if it doesn't work, you may need to manually insert them.

Hope that helps...

Cheers!
Cande

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

24th November 2013, 15:49	#1
Cande Junior Member Join Date: Nov 2013 Posts: 15	Hello Haz2k, you can check the ports in Shoutcast DNAS' configuration file you are using (usually "sc_serv_basic.conf"). If you didn't change anything, standard TCP ports are 8000 and 8001. If you are running sc_serv on a machine within your LAN, you need to configure NAT (Network Address Translation) on your router in order to redirect TCP ports 8000 and 8001 (or whatever you are using) to its internal (LAN) IP address. Modern routers auto create firewall rules for NAT, but if it doesn't work, you may need to manually insert them. Hope that helps... Cheers! Cande