How to relay multiple streams from the internet?

[designworks]

So I modified my conf as you suggested DrO and it now loads without error but the PLS file it serves up only has the first stream.

Here is the relevant part of my conf.

streamid_1=1
streampath_1=/triplej
streamrelayurl_1=http://shoutmedia.abc.net.au:10326
streamid_2=2
streampath_2=/tripler
streamrelayurl_2=http://s2.station*************:9020/3RRRFM
;streamauthhash_2=<enter_your_auth_key_here>

[designworks]

I should add that when executing SC with the command "sc_serv.exe sc_serv_relay.conf" I get a little error window with the title "Error" and the message "sc_serv.conf" and an OK button. Nothing else. I cant figure out what in that config is broken. I have tried commenting out lines 2 and/or 5 but it didn't help.

code:
adminpassword=admin

autoauthhash=0

email=email@domain.com

password=source

;streamid_1=1

Any ideas or suggestions? Thanks again.

[DrO]

Originally Posted by designworks

This was a new install with the latest version of SC from the webiste, downloaded just before Christmas so if its old and broken its because its the way it came. Also the Wiki examples I was trying to follow seemed to mirror these config files so I had no reason to suspect my config files were old and broken. =(

've checked what's on the site and it's definitely not including the correct version of the example files so i don't know how / why you've got it (unless it's from an earlier install and you're not looking at things in the examples folder (especially since the examples with <enter_your_auth_key_here> references were updated in the 2.2 release).

Originally Posted by designworks

Maybe the current release files and the Wiki need to be updated to reflect this?

ithe wiki is out of date and what's provided with the DNAS should be the correct version for that build of the DNAS (as present in the docs folder).

Originally Posted by designworks

So is the streamrelayurl_X=YYY the only part that is broken? Everything else was fine?

yes, that was the only part that was not correct in that it didn't specify the multi-stream part.

Originally Posted by designworks

So I modified my conf as you suggested DrO and it now loads without error but the PLS file it serves up only has the first stream.

the playlist links from the DNAS only provides what is specified for the specified stream number. without a working link to the DNAS, it's getting hard to double-check what it gives back vs what you're saying.

Originally Posted by designworks

I should add that when executing SC with the command "sc_serv.exe sc_serv_relay.conf" I get a little error window with the title "Error" and the message "sc_serv.conf" and an OK button. Nothing else. I cant figure out what in that config is broken. I have tried commenting out lines 2 and/or 5 but it didn't help.

am not aware of that from any of the code. can you please confirm it is definitely v2.4.2 build 167 that you're using ? (can be found at the start of the log or by running sc_serv -v). also are you running this directly or via some 3rd party control panel solution ? and what OS build is being used ?