amd vs. intel for avs

[times2]

hi all

as i'm upgrading my pc i wonder if anyone
out there has used avs on a p4 (i haven't)
and especially if anyone has compared
athlon performance to p4 performance.

i'd especially be interested if anyone
has the ability to compare performance
using my pixelplayer ape (see my 'ape goody' thread).

thanks

[cmountford]

I'm sorry that I don't know, but I felt it necessary to get your post back near the top. You might PM or e-mail UnConeD your question, though.

Just thought it had gone far too long without any replies to your thread, so I posted a reply to make it appear at the top of the thread list. Hopefully some of the people (AVS VJs: I'm talking to you!) who have used AVS on different computer setups will see this post.

Sorry - but my best computer is a P3 450 MHz, so I wouldn't be of help there

[Adasha]

my general experience is that Athlons are better at floating point maths than pentiums so any non-integer calculations should be faster at an equivalent MHz speed.

Having said that I'm sure someone from the pentium camp would be able to supply reasons why they are better, i guess it's down to what you can afford and your personal preference.

[times2]

i've done a couple of tests....

machine 1: athlon 1400 (non-XP), ali magik, pc2100 ddr

machine 2: p4 xeon dual 1800, i850 dual rambus pc800

machine 3: p3 dual 667, pc800 rambus

preset 1: 2 'pixelplayers', all the slowest settings (oversample, fader on ~50%). playing at 320x240. (

machine 1, 49.9fps.
machine 2, 57 fps.
machine 3, 32 fps.

preset 2: el-vis 'real 3d sentinel' (320x240)

machine 1, 25 fps.
machine 2, 32 fps.
machine 3, 21.3 fps.

this is a pretty damning result for the p4, that machine cost £4000 last week whereas the athlon cost £1400 a year ago!!

BUT when running preset 2, the p4 is running at 25% cpu use (=50% of 1 cpu) whereas the athlon is running at 75%. SO i would say a lot of the difference is down to AVS not being optimised for the p4, and therefore causing pipeline stalls etc.

can anyone else try these tests on their machines?

nb the display settings I used were MAXIMUM windowed performance, DONT wait for retrace, NO pixel doubling. And i used a 32-bit display mode for both (which is far faster for avs). There were no other programs running other than that winamp was playing an mp3.

[Atmo]

AMD athlon thunderbird 1400@1600, Asus A7V266, kingmax pc2100 ddr.

I get 27.2 fps for the sentinel preset at those settings.

25 flat non overclocked.

Also there doesnt seem to be much difference between thunderbird and XP processors running at the same clock speed. A friend of mine has a XP1700+ (1466 mhz) and when mines at 1466 its pretty much exactly se same.

[EL-VIS2]

DELL Dimension
PentiumIII/800 with Nvidia GeForce2
--> running at about 29 FPS

[dirkdeftly]

Sorry if I sound condescending, but I really don't think you're priorities are straight with upgrading your cpu. You shouldn't be thinking solely of your vis program's performance, instead, you should be considering how your more useful programs will function with a new processor.

But as long as you're asking, the AMD XP 2000+ can calculate Pi to one million digits in three-quarters the time the Pentium P4 can (this seems to me the most useful of the benchmark stats I've seen: pure raw calculation power)

[Rovastar]

I think YOU need to get YOUR priorities right. What else do you use your computer for if it is not for visuals?!?!

[dirkdeftly]

I don't think the word is appropriate - we have kids surfing this forum, remember?