sent bytes = 0

schockey · 1st June 2002, 18:04

I am new to shoutcast broadcasting. I set everything up with server, etc.

When I broadcast, it reads that NOTHING is sent.

How do I broadcast live and talk with my set to broadcast live and HEAR it?

Dale

Tom · 1st June 2002, 18:35

Sent Bytes 0 means that it is not picking up and audio data to send to the server. Be sure you have Winamp playing music. See: http://forums.winamp.com/showthread.php?threadid=86076 for setting up the DSP and the mixers for music and voice.

Tom

schockey · 1st June 2002, 19:38

that worked in turning the microphone on, and it is showing it is live.

But, now it won't connect when I click on connect!

What turned that part off that was working?

Thanks!

Dale

Tom · 1st June 2002, 23:31

Changing your Input Device should not make it unable to connect. Make sure you have the DNAS up and running and verify the info in the Output tab of the DSP is correct.

Tom

1st June 2002, 18:04	#1
schockey Junior Member Join Date: Jun 2002 Posts: 5	sent bytes = 0 I am new to shoutcast broadcasting. I set everything up with server, etc. When I broadcast, it reads that NOTHING is sent. How do I broadcast live and talk with my set to broadcast live and HEAR it? Dale

1st June 2002, 19:38	#3
schockey Junior Member Join Date: Jun 2002 Posts: 5	tried that worked in turning the microphone on, and it is showing it is live. But, now it won't connect when I click on connect! What turned that part off that was working? Thanks! Dale

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

1st June 2002, 18:35	#2
Tom Moderator Join Date: Apr 2000 Posts: 4,491	Sent Bytes 0 means that it is not picking up and audio data to send to the server. Be sure you have Winamp playing music. See: http://forums.winamp.com/showthread.php?threadid=86076 for setting up the DSP and the mixers for music and voice. Tom

1st June 2002, 23:31	#4
Tom Moderator Join Date: Apr 2000 Posts: 4,491	Changing your Input Device should not make it unable to connect. Make sure you have the DNAS up and running and verify the info in the Output tab of the DSP is correct. Tom