Help Again

[annpeart]

Hi guys I keep getting this error, can someone tell me what this means.

error opening source socket! FATAL ERROR! Some other process is using this port!


What othe process is using this port and how do I make it right.

Thanks

annpeart

[tuckerm]

SrcIp
DestIp

^ Both need to be set at any ^

[annpeart]

Hi tuckerm,

I set both to any, and still the same thing, but I'm going to go over it again just to try again.

Thanks

[dotme]

There are usually only two reasons you will get this error.

Either the config file does not contain

SrcIP=ANY
DestIP=ANY

Or... you are running more than one instance of the DNAS (It is already running and you run it again)

[annpeart]

So how would I notice this, I'm sorry but I'm quite new to this.

[tuckerm]

if its in the taskbar twice, is there two icons down there that look the same?

[annpeart]

yes there is 2 icon that looks the same, but i don't realize how i did this.

[tuckerm]

right click and kill the one thats giving the fatel error,
click the other one and copy and paste the DNAS log

[20quid]

I've followed your instructions but now it says:
[main] error opening client socket! FATAL ERROR! Some other process is using this port!

So what is the problem with the client socket and how do I fix it.

[hackerdork]

You still have something using the ports you have setup for shoutcast the defualt being TCP port 8000 and 8001. If your PC is stuck with that error and you have closed everything, shutdown and reboot.

from windows or *nix boxes you can see if a port is open by doing the following from a command line prompt (Windows START > RUN > Command } get you to the command prompt

WIN:

netstat -an |find "800"

*nix
netstat -an |grep 800

The above examples should! show you if have something listening on any port starting with 800, this would of cource include 8000 and 8001 so just modify this to match what ports you have the stream on, like 8080 just change the "800" to "808" so it would see 8080 and 8081 and so on.

~ Cheers

~ HD

[20quid]

I doesnt come up with a reply, is that good? If not hten what am I doing wrong?

[hackerdork]

I hope you mean output something like this would show if up you had the port in use:

tcp4 0 0 *.8080 *.* LISTEN
tcp4 0 0 *.8081 *.* LISTEN

Above means I have something listening (running) on port 8080 and 8081 which is true my stream is running on tcp port 8080

~ HD

[20quid]

It doesnt show anything like that. Here is what it does:
http://i10.photobucket.com/albums/a1...id/command.gif

[20quid]

If it helps, I'm on a WLAN.

[eyesrunred]

Where do I find or set my admin User name and password?
I've also been getting a NAT which won't let your site see me or
list me to the directory.. Any help solving these issues would be
wonderful The Forums have been more confusing then helpful at this point.
accually had to release My Ip in cmd prompt and contact my isp to receve new IP.. putting in request for static ip to hopefully solve some of this issue.