Old 5th May 2005, 14:47   #241
dotme
Moderator
 
dotme's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,024
Quote:
Originally posted by FairBol

<05/05/05@06:07:27> [source] icy-pub:1 ; icy-br:24 ; icy-url:http://192.168.1.95
192.168.xx.xx is a non-routable PRIVATE ip. I think you are behind a router/firewall - your Bellsouth DSL modem.

Time to visit http://www.portforward.com and configure that modem!
dotme is offline  
Old 5th May 2005, 14:47   #242
NJK
The Frisian
 
NJK's Avatar
 
Join Date: Sep 2003
Location: a real Frisian hometown
Posts: 14,990
Quote:
Originally posted by FairBol
Huh?
NO not huh?

READ is the magic word here, that goes also for the peru member

read the top thread , how to find the answer.
than read the faq thread
than use the forum search function to find more info about this error and if you still can't manage to do something about it , than you post back here.

that is the way these forums work!!

all given threads can be found in my signature , the bottom line shows all 3
first one goes to how to find the answer, second is faq thread, third goes to search function.

have a nice day.

Each Thursday a new show on Celtica Radio with Darkwave music.
**************************************************************************

WINAMPSHOUTCAST
NJK is offline  
Old 7th May 2005, 12:45   #243
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
OK, I disabled the firewall and did some other stuff, and I THINK I have the NAK problem solved. However, I have now run into another small complication...people that are trying to listen at the other end are saying that they are getting a "connection refused" message. Any idea what might be causing this, and how I can remedy the problem?

--Matt

--Matt
FairBol is offline  
Old 7th May 2005, 12:50   #244
tuckerm
Forum Emo
 
tuckerm's Avatar
 
Join Date: Mar 2005
Posts: 8,365
probably:
1) port number is wrong
2) ip number wrong
3) listen link is wrong
tuckerm is offline  
Old 7th May 2005, 13:38   #245
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
Another strange thing is happening....I notice when I put in http://127.0.0.1:8000/listen.pls and click on it, I hear whatever I am broadcasting. However, if I put in http://65.11.140.94:8000/listen.pls and click on it, I get nothing. Perhaps I have the two IP's confused? Any further advice? BTW, the port number I am using at present is 8000, and of the two IP's, the latter is the one I give out. I would greatly appreciate any help you could give me on this matter. Thanks.

--Matt
FairBol is offline  
Old 7th May 2005, 13:40   #246
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
BTW, the 65.xx.xxx came from whatismyipaddress.com, if it matters.

--Matt
FairBol is offline  
Old 7th May 2005, 13:41   #247
dotme
Moderator
 
dotme's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,024
Matt - you still need to config your modem to forward ports. You're on DSL, right? What is the Make/Model of your DSL modem? What is the internal (Private) IP of your SHOUTCast server?
dotme is offline  
Old 7th May 2005, 14:05   #248
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
That is correct. I'm operating on a Westell DSL modem, model b90-220030-04. The IP of my server is...darn. Call me an idiot, but I'm not sure how I would find that. Would it be the same address entered in the "URL" section of the "Yellow Pages" part of the Shoutcast Source plug-in? If so, it is http://127.0.0.1.

--Matt
FairBol is offline  
Old 7th May 2005, 14:16   #249
dotme
Moderator
 
dotme's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,024
http://www.portforward.com/westell/B...forwarding.htm

Go here Matt. Your SHOUTCast server IP, from an earlier post, is 192.168.1.95

In Step 7, your range is 8000-8001 and your base port is 8000 and Protocol is TCP

The one thing I am not seeing on the page above is where you enter the LAN IP this new service applies to (In your case, 192.168.1.95). Hopefully you'll see that during the setup process. I would follow the instructions on the above page step-by-step, and hopefully somewhere in there you will be asked for your LAN IP. Once that info is in the modem, post here again and I'll try to hit your station from the outside.
dotme is offline  
Old 7th May 2005, 16:09   #250
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
Hmmm....seems to be one problem after another lately....the latest is that I can't access the IP they give me on http://www.portforward.com/westell/B...orwarding.htm. So I'm stuck again...what do I do now? Mega-frustrated over here!!

--Matt
FairBol is offline  
Old 7th May 2005, 16:11   #251
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
Bad link....I meant when they tell me to go intothe router....somehow it "does not compute".

--Matt
FairBol is offline  
Old 7th May 2005, 16:15   #252
dotme
Moderator
 
dotme's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,024
You mean the IP of the router to log in and configure it?

http://192.168.1.1 OR http://192.168.1.1:8080

Try one of the above links to see if you can get to the login screen of that DSL modem. If one of them works, then go ahead and follow the steps on PortForward after you see the main screen. If neither of them work, post back and we'll go over how to find out what internal IP address the DSL modem has.
dotme is offline  
Old 7th May 2005, 16:20   #253
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
Negative on both.

--Matt
FairBol is offline  
Old 7th May 2005, 16:24   #254
djSpinnerCee
Forum King
 
djSpinnerCee's Avatar
 
Join Date: Aug 2004
Location: Hollis, Queens/The Bronx, NYC
Posts: 3,511
The easiest way to find the router's IP is to run ipconfig /all on one of your PCs -- the IP you find for default router/gateway is the LAN IP of your router.

Like everything in computers, there's a million ways to check for this, another way would be route print -- looking for the entry starting with 0.0.0.0 noting the "Gateway" IP -- you can also open network connections and view the status of your Ethernet interface, or click the little icon on your taskbar, if you have it set to display while connected... the list is long...
djSpinnerCee is offline  
Old 7th May 2005, 16:35   #255
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
OK, now this is REALLY weird....there is no entry! Is there something I'm missing here?

--Matt
FairBol is offline  
Old 7th May 2005, 16:43   #256
djSpinnerCee
Forum King
 
djSpinnerCee's Avatar
 
Join Date: Aug 2004
Location: Hollis, Queens/The Bronx, NYC
Posts: 3,511
Make sure you find the correct interface if you use the ipconfig method -- if you ever had dialup configured, or more than one NIC in the PC there will be multiple entries.

A long list may need ipconfig /all | more
djSpinnerCee is offline  
Old 7th May 2005, 17:00   #257
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
OK. I think I'm ready to test at http://65.11.140.94:8000/listen.pls

--Matt
FairBol is offline  
Old 7th May 2005, 17:03   #258
djSpinnerCee
Forum King
 
djSpinnerCee's Avatar
 
Join Date: Aug 2004
Location: Hollis, Queens/The Bronx, NYC
Posts: 3,511
OK

Server is currently up and private...

Your DNAS Station Page = http://65.11.140.94:8000/
djSpinnerCee is offline  
Old 7th May 2005, 17:05   #259
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
Cool. Can you hear anything, or is it still giving a connection refused?

--Matt
FairBol is offline  
Old 7th May 2005, 17:06   #260
dotme
Moderator
 
dotme's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,024
Congratulations Matt! Jimmy Buffett coming through loud and clear. Well done.
dotme is offline  
Old 7th May 2005, 17:13   #261
FairBol
Junior Member
 
Join Date: May 2005
Location: Southwestern CT
Posts: 27
Send a message via AIM to FairBol Send a message via Yahoo to FairBol
WOOHOO!! Many thanks to Dotme and djSpinnerCee for all their help, it is very much appreciated. I have been working on this for aproximately five days, and I'm so happy I finally figured it out. You guys are the best....rock on!!

--Matt
FairBol is offline  
Old 7th May 2005, 17:29   #262
perudesign
Junior Member
 
Join Date: May 2005
Posts: 6
Help please

Hi guys:

I have this problem with my shoutcast

1- I have everything set up, look like si working but its wonts

2- i didit upload notinh in my sever, www.radio.houseperu.com // what do i have to upload, the ip of my server is 66.195.18.210

3- i have like 2 months trying to do it, i want someone to help me please, i going to go crazy with this

4- i dont have to firewall, my conection is a adsl

this is my configuration:

-----------------------------------------------------------

; SHOUTcast Distributed Network Audio Server configuration file
; Copyright (C) 1998-2001 Nullsoft, Inc.
; All Rights Reserved.
; Last modified Jul 23 2001

; If you want to manage multiple configurations, just copy
; this file to another name, and run sc_serv with that name
; such as:
; sc_serv.exe sc_leet.conf

; ***************************
; Required stuff
; ***************************

; MaxUser. The maximum number of simultaneous listeners allowed.
; Compute a reasonable value for your available upstream bandwidth (i.e. if
; you have 256kbps upload DSL, and want to broadcast at 24kbps, you would
; choose 256kbps/24kbps=10 maximum listeners.) Setting this value higher
; only wastes RAM and screws up your broadcast when more people connect
; than you can support.
MaxUser=4

; Password. While SHOUTcast never asks a listener for a password, a
; password is required to broadcast through the server, and to perform
; administration via the web interface to this server. This server should
; consist of only letters and numbers, and is the same server your broadcaster
; will need to enter in the SHOUTcast Source Plug-in for Winamp. THIS VALUE
; CANNOT BE BLANK.
Password=tambor
; PortBase. This is the IP port number your server will run on. The
; value, and the value + 1 must be available. If you get a fatal error when
; the DNAS is setting up a socket on startup, make sure nothing else on the
; machine is running on the same port (telnet localhost portnumber -- if you
; get connection refused then you're clear to use that port). Ports < 1024
; may require root privledges on *nix machines. The default port is 8000.
PortBase=8000

; ***************************
; Optional Parameters
; ***************************

; ***************************
; Logging configuration
; ***************************

; LogFile: file to use for logging. Can be '/dev/null' or 'none'
; or empty to turn off logging. The default is ./sc_serv.log
; on *nix systems or sc_serv_dir\sc_serv.log on win32.
; Note: on win32 systems if no path is specified the location is
; in the same dir as the executable, on *nix systems it is in the
; current directory.
LogFile=sc_serv.log

; RealTime displays a status line that is updated every second
; with the latest information on the current stream (*nix and win32
; console systems only)
RealTime=1

; ScreenLog controls whether logging is printed to the screen or not
; on *nix and win32 console systems. It is useful to disable this when
; running servers in background without their own terminals. Default is 1
ScreenLog=1

; ShowLastSongs specifies how many songs to list in the /played.html
; page. The default is 10. Acceptable entries are 1 to 20.
ShowLastSongs=10

; HistoryLog: file to use for history logging. Can be '/dev/null' or
; 'none' or empty to turn off history logging.
; History logging is used for the nifty web-based graph of listeners,
; too.
HistoryLog=sc_hist.log

; HistoryTime specifies the interval in seconds of history logging.
; This effects the granularity and update frequency of the web-based
; graph, as well. The default is 30.
HistoryLogTime=30

; TchLog decides whether or not the DNAS logfile should track yp
; directory touches. Adds and removes still appear regardless of
; this setting.
; Default is yes
; TchLog=yes

; WebLog decides whether or not hits to http:// on this DNAS will
; be logged. Most people leave this off because the DSP plug-in
; uses http:// calls to update titles and get the listener count,
; which takes up a lot of log space eventually. If you want to
; see people making hits on your admin.cgi or index pages, turn
; this back on. Note that this setting does NOT affect XML stats
; counters for hits to http:// pages.
; Default is no.
; WebLog=no

; ***************************
; Network configuration
; ***************************

; SrcIP, the interface to listen for source connections on (or to make relay
; connections on if relaying). Can and usually will be ANY or 127.0.0.1
; (Making it 127.0.0.1 will keep other machines from being able to
; broadcast using your shoutcast server )
SrcIP=127.0.0.1

; DestIP, IP to listen for clients on (and to contact yp.shoutcast.com)
; can and usually will be be ANY. If your machine has multiple IP addresses,
; set this to the one you want it to be accessed by.
DestIP=ANY

; Yport, port to connect to yp.shoutcast.com on. For people behind caching
; webproxies, change this to the alternate port (666 is what it might be,
; check www.shoutcast.com if you have problems). Otherwise, leave this at 80.
; We're actively working on re-opening port 666, but as of release the only
; working port is port 80.
Yport=80

; NameLookups. Specify 1 to perform reverse DNS on connections.
; This option may increase the time it takes to connect to your
; server if your DNS server is slow. Default is 0 (off).
NameLookups=1

; RelayPort and RelayServer specify that you want to be a relay server.
; Relay servers act as clients to another server, and rebroadcast.
; Set RelayPort to 0, RelayServer to empty, or just leave these commented
; out to disable relay mode.
; RelayPort=8000
; RelayServer=192.168.1.58

; ***************************
; Server configuration
; ***************************


; AdminPassword. This password (if specified) changes the
; behavior of Password to be a broadcast-only password, and
; limits HTTP administration tasks to the password specified
; here. The broadcaster, with the password above, can still
; log in and view connected users, but only the AdminPassword
; will grant the right to kick, ban, and specify reserve hosts.
; The default is undefined (Password allows control for both
; source and admin)
; AdminPassword=adminpass

; AutoDumpUsers controls whether listeners are disconnected if the source
; stream disconnects. The default is 0.
AutoDumpUsers=0

; AutoDumpSourceTime specifies how long, in seconds, the source stream is
; allowed to be idle before the server disconnects it. 0 will let the source
; stream idle indefinately before disconnecting. The default is 30.
AutoDumpSourceTime=30

; ContentDir specifies the directory location on disk of where to stream
; on-demand content from. Subdirectories are supported as of DNAS 1.8.2.
; Default is ./content, meaning a directory named content in the same directory
; as where sc_serv was invoked from.
; ContentDir=./content

; IntroFile can specify a mp3 file that will be streamed to listeners right
; when they connect before they hear the live stream.
; Note that the intro file MUST be the same samplerate/channels as the
; live stream in order for this to work properly. Although bitrate CAN
; vary, you can use '%d' to specify the bitrate in the filename
; (i.e. C:\intro%d.mp3 would be C:\intro64.mp3 if you are casting at 64kbps).
; The default is no IntroFile
; IntroFile=c:\intro%d.mp3

; BackupFile can specify a mp3 file that will be streamed to listeners over
; and over again when the source stream disconnects. AutoDumpUsers must be
; 0 to use this feature. When the source stream reconnects, the listeners
; are rejoined into the live broadcast.
; Note that the backup file MUST be the same samplerate/channels as the
; live stream in order for this to work properly. Although bitrate CAN
; vary, you can use '%d' to specify the bitrate in the filename
; (i.e. C:\backup%d.mp3 would be C:\backup32.mp3 if you are casting at 32kbps).
; The default is no BackupFile
; BackupFile=C:\intro%d.mp3

; TitleFormat specifies a format string for what title is sent to the listener.
; For example, a string of 'Justin Radio' forces the title 'Justin Radio' even
; when the source changes the title. You can use up to one '%s' in the string
; which lets you contain the title from the source. For example, if your
; TitleFormat is 'Justin Radio: %s', and the source plug-in's title is
; 'Billy plays the blues', then the net title is
; 'Justin Radio: Billy plays the blues'. Note: only works on non-relay servers.
; The default is no format string.
; TitleFormat=Justin Radio: %s

; URLFormat specifies a format string for what url is sent to the listener.
; Behaves like TitleFormat (see above).
; The default is no format string.
; URLFormat=http://www.server.com/redirect.cgi?url=%s

; PublicServer can be always, never, or default (the default, heh)
; Any setting other than default will override the public status
; of the source plug-in or of a SHOUTcast server that is being relayed.
PublicServer=default

; AllowRelay determines whether or not other SHOUTcast servers will be
; permitted to relay this server. The default is Yes.
AllowRelay=Yes

; AllowPublicRelay, when set to No, will tell any relaying servers not
; to list the server in the SHOUTcast directory (non-public), provided
; the relaying server's Public flag is set to default. The default is
; Yes.
AllowPublicRelay=Yes

; MetaInterval specifies how often, in bytes, metadata sent.
; You should really leave this at the default of 8192, but the option is
; provided anyway.
MetaInterval=8192

; *****************************
; Access Control
; *****************************

; ListenerTimer is a value in minutes of maximum permitted time for
; a connected listener. If someone is connected for longer than this
; amount of time, in minutes, they are disconnected. When undefined,
; there is no limit defined. Default is undefined.
; ListenerTimer=600

; BanFile is the text file sc_serv reads and writes to/from
; for the list of clients prohibited to connect to this
; server. It's automatically generated via the web
; interface.
; BanFile=sc_serv.ban

; RipFile is the text file sc_serv reads and writes to/from
; for the list of client IPs which are *ALWAYS* permitted
; to connect to this server (useful for relay servers).
; This file is automatically generated via the web
; interface. Note that if your server is FULL, and someone
; from a Reserved IP connects, the DNAS will force the person
; listening for the longest time off to make room for the new
; connection.
; RipFile=sc_serv.rip

; *****************************
; Extended Logging (CurrentLog)
; *****************************

; CurrentLog logging lets you specify an HTML template and have
; the SHOUTcast server generate a file from it.

; Template keywords:
; "<!-- LISTENERS -->" number of listeners
; "<!-- MAXLISTENERS -->" server configured maximum listeners
; "<!-- LISTENERTABLE -->" a simple table of listeners
; "<!-- GENRE -->" the current genre string
; "<!-- DESCRIPTION -->" the current description string
; "<!-- URL -->" the current URL string
; "<!-- HITS -->" the number of hits since server was started
; "<!-- CURRENTSONG -->" the current song name

; CurrentLogIn is the input (template) file
; CurrentLogIn=c:\hi.in
; CurrentLogOut is the output file. Put it somewhere where another
; web server can get at it (sorry, http://server/current.html isn't
; supported any longer)
; CurrentLogOut=C:\hi.html
; CurrentLogTime is the update frequency, in seconds
; CurrentLogTime=30

; ***************************
; Mass Configuration
; ***************************

; Unique: assigns a variable name for use in any config item which points to a
; file. Useful for servers running lots of SHOUTcast servers that have similar
; configuration parameters, excepting logfile names, banfile names, etc. Any
; parameter that takes a pathname can include the character $, which will
; substitute $ for the variable assigned here. Keep in mind that the unique
; variable can only be used after it is defined, so don't try to use a unique
; variable substitution in a path before you define it. For example, you
; could set:
; Unique=my_server
; and then define Log=/usr/local/shoutcast/$.log in an included configuration
; file. Default is Unique=$, so that by default any file with $ in the name
; won't substitute anything at all.

; Include: instructs the sc_serv to read from the named configuration file,
; *at the point of insertion of the Include statement*, and process as though
; the included file was part of itself. Note that all configuration parameters
; in the DNAS config file are processed first to last, so if an item is defined
; twice in a configuration, the last item to process will be the one that takes
; effect. For this reason, it's usually a good idea to use the Includes first
; in a config file.
; example:
; Include=/usr/local/shoutcast/common.conf
; Default is not applicable.

; *****************************
; Tweaks
; *****************************
;
; DON'T MESS WITH THIS STUFF UNLESS YOU REALLY KNOW WHAT YOU'RE DOING.
; DON'T COMPLAIN TO US IF YOU MESS WITH IT AND THINGS BREAK.
; HAVE A NICE DAY.

; CpuCount is used to explicitly limit the DNAS to dominating a finite
; amount of processors in multiprocessor systems. By default,
; SHOUTcast creates one thread for every processor it detects in the
; host system, and assigns listeners equally across all the threads.
; In the event SHOUTcast doesn't correctly determine the number of
; CPUs in your host, or if you for whatever reason want to force
; the DNAS to not use other processors, you can say so here.
; Default behavior is to use as many processors as the DNAS detects on
; your system.
; CpuCount=1

; Sleep defines the granularity of the client threads for sending data.
; DNAS 1.7.0, per client thread, will send up to 1,024 bytes of data
; per socket (or less depending on the window available), and then
; sleep for the provided duration before repeating the whole process.
; Note that making this value smaller will vastly increase CPU usage on
; your machine. Increasing reduces CPU, but increasing this value too far
; will cause skips. The value which seems most optimal for 128kbps
; streaming is 833 (833 microseconds per client poll) on our test labs.
; We wouldn't recommend setting it any lower than 100, or any higher than
; 1,024. If you have a slower machine, set this number lower to fix
; skips.
; Default value is 833.
; Sleep=833

-----------------------------------------------------------

What im doing wrong, help me please guys

JC
Attached Images
File Type: jpg screen_soutcast.jpg (57.3 KB, 259 views)
perudesign is offline  
Old 7th May 2005, 17:57   #263
djSpinnerCee
Forum King
 
djSpinnerCee's Avatar
 
Join Date: Aug 2004
Location: Hollis, Queens/The Bronx, NYC
Posts: 3,511
The Cannot See Your Station Error message that is incomplete in the image you uploaded is your problem -- The IP displayed there is the IP that we need to see.

My guess is that you have a router or a modem router that does NAT -- this means that the router or modem has the internet IP for your PC -- you have to configure this modem/router to do port forwarding -- check my sig, the links are there. This thread also has hints on how you "find" the router's IP, and how to get started...

Your SHOUTcast is now properly set up, so you can leave it alone now -- focus your attention on your router. I will not give you a step-by-step because there is none -- you have to learn how to do this with your own router.
djSpinnerCee is offline  
Old 7th May 2005, 18:15   #264
perudesign
Junior Member
 
Join Date: May 2005
Posts: 6
Quote:
Originally posted by djSpinnerCee
The Cannot See Your Station Error message that is incomplete in the image you uploaded is your problem -- The IP displayed there is the IP that we need to see.

My guess is that you have a router or a modem router that does NAT -- this means that the router or modem has the internet IP for your PC -- you have to configure this modem/router to do port forwarding -- check my sig, the links are there. This thread also has hints on how you "find" the router's IP, and how to get started...

Your SHOUTcast is now properly set up, so you can leave it alone now -- focus your attention on your router. I will not give you a step-by-step because there is none -- you have to learn how to do this with your own router.
this is my router, i dont know how to do it, teach me please

help me

my ip to go out of the internet is 192.168.1.1
my dns is 200.48.225.130 and 200.48.225.146

Welcome [1]: client-201.240.70.64.speedy.net.pe (201.240.70.64) Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
Attached Images
File Type: jpg router.jpg (49.1 KB, 240 views)
perudesign is offline  
Old 7th May 2005, 18:30   #265
perudesign
Junior Member
 
Join Date: May 2005
Posts: 6
this is my router, i dont know how to do it, teach me please

help me

my ip to go out of the internet is 192.168.1.1
my dns is 200.48.225.130 and 200.48.225.146

Welcome [1]: client-201.240.70.64.speedy.net.pe (201.240.70.64) Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1

Your IP Address is: 201.240.70.64

Calculating Max Stream Listeners [DNAS MaxUser] by Available Bandwidth [speedtest] [ reset]


Upload/Outbound Bitrate: kbps -- DNAS Portbase:

-or-

I want to be able to support Simultaneous Listeners, DNAS Portbase:


note: kbps=kilobits/sec ... 1,000kbps=1Megabit/sec.
10,000kbps=10Megabit Ethernet ... DSL=128-768kbps
Broadband Cable=300-800kbps ... Dial-Up modem=33-56kbps

©2004 djSpinnerCee! is Christopher_Walker@ATT.net.1

http://www.portforward.com/xavi/8021r.htm
Xavi 8021R Adsl Router
perudesign is offline  
Old 7th May 2005, 20:52   #266
Germ
rules all things
 
Germ's Avatar
 
Join Date: Jan 2001
Posts: 3,149
Do not double post, and search for your answer. I'm locking this thread.
Germ is offline  
Closed Thread
Go Back   Winamp & Shoutcast Forums > Shoutcast > Shoutcast Technical Support

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump