Go Back   Winamp & SHOUTcast Forums > Winamp > Winamp Technical Support

Closed Thread
Thread Tools Search this Thread Display Modes
Old 31st May 2002, 16:02   #1
Mr Jones
Nothing to say...
 
Mr Jones's Avatar
 
Join Date: Sep 2000
Location: UK
Posts: 23,048
Looking for: Winamp3 or 2x, IRC Tech Channel, or SHOUTcast Help? READ THIS!

If you have arrived in this forum with a technical support question that concerns SHOUTcast broadcasting / streaming, would you please visit the following forum to post your question.

http://forums.winamp.com/forumdisplay.php?forumid=86

That forum is SHOUTcast Technical Support, where your question will receive attention from your fellow broadcasters and DJ's.

The forum that you are in currently is for support of Winamp, and not the SHOUTcast application.

Thanks.



[Edit --> DJ Egg]

As from August 2004, the following conditions now apply:

Shoutcast dsp/dnas related topics posted in Winamp Tech Support will either be moved or locked.
If no-one replies, then the post will be moved to Shoutcast Tech Support.
If someone replies (saying: 'wrong forum' yadda yadda etc) whilst the thread is still in the Winamp Tech Support forum, but before a moderator has had chance to move it, then the thread will be locked instantly!
So basically, I suggest that 1) you post in the correct forum and 2) if you DO post in here by mistake, that no-one replies until the thread has been moved.

The reason for this is because the Shoutcast Tech forum gets a lot of posts, and any threads with replies will tend to be ignored by the responders in there (mainly because they will assume that the issue is already being taken care of).
Moderators moving posts should just type in an Edit stating that they've moved the thread, but should not actually post a reply unless they are dealing with the issue.

Thankyou

-Egg
__________________________________________________________


Looking for Winamp3 1.0 or Winamp 2.x ?

With the release of Winamp 5.0, the old Winamp3 v1.0 is no longer being supported on the forums. Development of the "Winamp3" product has been halted by Nullsoft. it is highly recommended that you upgrade to Winamp 5.x.

Winamp3 is no longer supported on the Winamp Forums. The Winamp3 forums are still available for archival purposes. If you want to try to find any old help about Winamp3 check out the:
Winamp3 Forums.

Threads asking for Winamp3 help here will be ignored and locked.

Winamp3 development ended in 2003. What was Winamp3 has been rebranded as wasabi.player. This is not a supported product and it's not meant for general end user useage. But if you are still interested in the development for Winamp3 or wasabi.player please refer to the Wasabi Development forum.

Winamp3 v1.0 and all older versions of Winamp (1.x, 2.x, 5.x) are still available at winampheaven or oldversion.com. But we do NOT provide support for old versions.

As Winamp 5.x is the direct continuation of the Winamp 2.x line, all threads asking for 2.x/support will be locked.

Guide to "sidegrading" from Winamp3 to Winamp 5
Mr Jones is offline  
Old 23rd September 2002, 22:49   #2
fish
Pretty Cool Guy
 
Join Date: Sep 2000
Location: Cle, OH, USA
Posts: 4,847
Send a message via AIM to fish
Winamp tech support IRC channel

Reaper has started an IRC channel to assist in the answering of Winamp 5 tech support questions.

If you just want a quick answer to a short question
#WinampTech can probably help you.


For those with an IRC client, eg. mIRC:
#WinampTech

/server irc.p44.org
/join #winamptech

Or if you can't connect to irc.p44.org, try the ip instead:

/server 72.20.48.33
/join #winamptech


For those without an IRC client:
Java Chat
Once you click that link it will prompt you to install the jpilot chat software, simply click yes and you will be brought to a screen listing the server, channel etc. Enter your nick where it currently says Guest and click Connect.

You will be taken to the chat.

__________________________________________________________


Important Notes

We usually only respond after you've asked your Winamp-related question, ie. we'll probably NOT respond if you come into the channel and say "Hi, anyone here?".
So we recommend that you ask your actual question first and then wait up to 30 minutes or so for a reply. Though on most occasions someone will reply to a Winamp-related question within a matter of seconds/minutes.


#winamptech is for tech support issues with the Winamp client only.

Do not bother visiting the channel if your question is related to Plugin Development or Shoutcast Broadcasting etc. Please visit the relevant forum here instead, and post your question there. But make sure you read the sticky topics at the top of those forums first.
fish is offline  
Old 15th December 2003, 23:03   #3
Sawg
Guest
 
Posts: n/a
-
 
Closed Thread
Go Back   Winamp & SHOUTcast Forums > Winamp > Winamp Technical Support

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump