No One Can Connect To My Server! Help.

[makinistfanlari]

I opened a shoutcast server to my computer. I can connect to my own server via using google chrome with my hamachi IP. How I can connect with my normal IP? Because my other friends cannot connect to broadcast. Thanks for support. (I am using SAM2 with shoutcast server)

[neralex]

You must open the port in your router, where the DNAS is running.

http://wiki.winamp.com/wiki/SHOUTcas...ything_Else.3F

http://portforward.com/english/routers/port_forwarding/

[makinistfanlari]

Originally Posted by neralex

You must open the port in your router, where the DNAS is running.

http://wiki.winamp.com/wiki/SHOUTcas...ything_Else.3F

http://portforward.com/english/routers/port_forwarding/

I already opened an UDP Port 8888 (my port).

[makinistfanlari]

I opened the following ports:

TCP 8000-8001

UDP 8000-8001

still not working on my normal IP. works on my hamachi and local IP.

[jaromanda]

connecting to external IP from internal network wont work on most routers because they don't do loopback on port forwarding

don't worry if you don't understand what I just said, just get someone not on your LAN to test for you ... or learn basic networking, which I would say is a must if you're going to host services, but that's just my opinion -then you may know that forwarding UDP ports is not required for DNAS, and forwarding port 8001 is probably not required unless you're sourcing the stream from outside your LAN and using legacy DNAS (i.e. not DNAS 2)

[thinktink]

https://www.google.com/search?q=Remo...utf-8&oe=utf-8

Use one of the listed services (probably the first one) to check if your router is actually forwarding your port correctly. Do it while you have the DNAS running.

[makinistfanlari]

Says "Port 8000 is closed ..." . I can only connect with my localIP and hamachi IP. (I opened port ^^)

[jaromanda]

Originally Posted by makinistfanlari

Says "Port 8000 is closed ..." .

then it's not opened

Originally Posted by makinistfanlari

(I opened port ^^)

no you didn't ^^

[makinistfanlari]

Originally Posted by jaromanda

then it's not opened

no you didn't ^^

[jaromanda]

looks like you've opened port 8000 and redirected it to 8001 to me - that's what 8000->8001 looks like

are you sure you've selected 8000 and 8001, and forwarded them to the correct LAN ip address (the ip address of the computer running DNAS)


edit: maybe I wasn't clear earlier, whilst it makes no difference, there's really no reason to do anything with UDP regarding port 8000 (or 8001)

[jaromanda]

Originally Posted by makinistfanlari

I opened the following ports:

you need to FORWARD the ports from WAN to a SPECIFIC LAN ip address

"opening" ports is meaningless in this context

post a screenshot of your router port forwarding page where you've forwarded the ports

[makinistfanlari]

Uhh.. My modem doesnt accept new ports. I tried to open for Minecraft, it ignored again. Theres a problem with my modem. (I have one more in the house) I will try with the other modem.

[DrO]

you will probably be better off using a hosting service than trying to run the DNAS on your own home setup (especially if you're not being able to make the DNAS accessible to the internet - which depending on the country and ISP you're using may not allow you to do what you're trying to do anyway).

[mast]

hello ,
i am new to this forum. i have setup a shout cast server with static ip , i open the required port. now any machine connected to same network can get access to stream while no body els can get access .i disabled the firewall on my server and on the router. but it did not work.
if any body can help?

____________________________________________

[Moderator comment]

Double-posted and responded to here
http://forums.winamp.com/showthread.php?t=382467