viewing stream settings

dr feelgood · 24th May 2003, 07:48

what do you people set your nsv decoder at I have had no luck with the settings I have tried i have a 1.5 meg 300 up dsl connection so it should work just wondering if my settings are wrong

Like in the ohmytrance station the music is like 20 seconds ahead of the video. Its almost tough to watch and same with the other channels, now i know there will probably be some delay but 20 seconds? if not

is it possible to ever have that trance channel that streams at 300k well hey any stream at 300k or higher to have good sync audio and video wise? what am I doing wrong guys

mrdak · 9th June 2003, 16:17

I've got the same problem and I will be looking for a fix. I'm using a cable modem and this was the same for me with a DSL connection, and,,,,, setting the video/audio offset tweak in the preferences does nothing. I'll try a few more settings and check back. Please let me in on any thing you may find about this ok, Dr Feelgood ?:-)
peace

9th June 2003, 21:24

I don't seem to have the delay problems.

Make sure you are using Winamp 2.91 and not 2.90. There were some sync fixes in 2.91

yedo · 10th June 2003, 00:54

I've also got audio/video synchronized problem.I'm using ADSL line and send video stream with nsvscsrc.My problem is when I send stream long time,Audio is always go ahead(about 0.5-5sec)
I've tried to fix.But I couldn't fix it.
So I think This is bug of nsvscsrc.I want to know somebody's ideas.

mrdak · 12th June 2003, 16:07

Both 2.90 and 2.91 work the same for me. My sync. problem is when I'm trying to stream the Nullsoft tv channels, and I would like to know what settings to use in the config. The offset video from audio settings in miliseconds. How many ms ???? I've tried different settings and no change. help ??

Thanks in advance.

streamingfreak · 15th June 2003, 22:03

I have the same problem as these people and I am using winamp 2.91, it does the same

streamingfreak · 16th June 2003, 00:34

hey I solved it guys, set the offset audio to video to -9000

streamingfreak · 16th June 2003, 00:35

ok nm that only worked for a litle bit, what the heck

mrdak · 17th June 2003, 05:37

I've tried that seetting along with all sorts of other settings and nothing works. I guess we are gonna have to wait for this little part of winamp to get somewhat more developed. bu bu bu bu but,,,,please post if you get it to work. I will ;-)
peace,,,,mrdak

streamingfreak · 17th June 2003, 15:01

but it works now, without doing anything it works, THEY FIXED IT

mrdak · 17th June 2003, 23:51

Wait --------Please explain.....You say it works... do you mean it works in the internet tv section of the winamp library ?

If so ........It would be soo cool if you told me what you did. or If you could tell me what type of internet connection you are using.
I'm using a cable modem and all the streams are choppy and the audio and video is all out of sync. Please explain your success. My radie stations stream extreamly well. Just the internet tv stations do what I said. It would be great if I could get them to work.
???????????????????????????????????????????????????You said that they fixed it. In the 2.92 version ? or what.
thanx, mrdak....*

streamingfreak · 18th June 2003, 00:18

no I am using 2.91, I have a cable conection, everything is in sync for me, I put the offset value to 0 and all the buffer/prebuffer setings are at 3000

streamingfreak · 18th June 2003, 00:20

I didn't think the buffer setings mattered too much though, so I figured they must have fixed the bug

mrdak · 18th June 2003, 20:32

cool, I'll try 2.91 again and get back with you. thanks for the reply.

Blup · 31st July 2003, 20:37

ok, i am having the same sync problem. i'm streaming a video channel with nsvscsrc and the audio gets worse the longer a user watches. what can i try to fix this problem ? if a user stops and restarts, it's fine until it gets off again. yall talk about making some sort of adjustment but i think thats in winamp itself. when i watch other channels like ohmytrance and XDM i dont see the problem, it's just with my channel so i think its nsvscsrc.

thanx,
Blup

Jay · 31st July 2003, 21:49

heh, no this is bug in either the way winamp is decoding NSV or in NSV itself, I have noticed that any station that stacks files in order to stream them (uses nsvscsrc or other stacking apps) the stream will slowly lose sync.

We just have to wait until something more definitive comes from nullsoft. Hopefully it's just a decoding thing and the next winamp will fix it.

Boadie · 9th October 2003, 03:29

I don't know if this helps guys, but I was about to pull my hair out trying to get OHMYTRANCE and other streams to sync with video and audio. I have finally found that I have to disable my DSP in order for it to work. If you go into your DSP section in Preferences and select None, then click on the stream you want again and it should sync just nicely. No DSP to make it sound great, but it works.

Jeeper One · 9th October 2003, 09:15

Hi everyone:

Quote:

Originally posted by Sawg
I don't seem to have the delay problems.

Make sure you are using Winamp 2.91 and not 2.90. There were some sync fixes in 2.91

Some bugs were fixed while others (such as the static noise on low-fi audio sampling streams/NSV files) were NOT fixed.

I just downloaded THE latest version of Winamp 2 just a few seconds ago (I downloaded the FULL version too!).

I'm tellin' ya NSV still plays better in Winamp 3 on my machine. If ya want, I'll even record a sample of what I mean.

Cheers for now :-)

Patrick Cook
Proud Member - Electronic Frontier Foundation - http://www.eff.org/
Program Director
Jeeper One Radio Network
KPDC Internet TV - REAL Web TV
Denver, Colorado
http://kpdcnetradio.***********/
http://kpdcnettv.***********/
NEW BLOG PAGE - http://kpdcnettv.***********/blog.html

24th May 2003, 07:48	#1
dr feelgood Junior Member Join Date: May 2003 Posts: 1	viewing stream settings what do you people set your nsv decoder at I have had no luck with the settings I have tried i have a 1.5 meg 300 up dsl connection so it should work just wondering if my settings are wrong Like in the ohmytrance station the music is like 20 seconds ahead of the video. Its almost tough to watch and same with the other channels, now i know there will probably be some delay but 20 seconds? if not is it possible to ever have that trance channel that streams at 300k well hey any stream at 300k or higher to have good sync audio and video wise? what am I doing wrong guys

31st July 2003, 20:37	#15
Blup Junior Member Join Date: Jun 2002 Posts: 28	w0rd ok, i am having the same sync problem. i'm streaming a video channel with nsvscsrc and the audio gets worse the longer a user watches. what can i try to fix this problem ? if a user stops and restarts, it's fine until it gets off again. yall talk about making some sort of adjustment but i think thats in winamp itself. when i watch other channels like ohmytrance and XDM i dont see the problem, it's just with my channel so i think its nsvscsrc. thanx, Blup

31st July 2003, 21:49	#16
Jay Moderator Alumni Join Date: May 2000 Location: Next Door Posts: 8,888	heh, no this is bug in either the way winamp is decoding NSV or in NSV itself, I have noticed that any station that stacks files in order to stream them (uses nsvscsrc or other stacking apps) the stream will slowly lose sync. We just have to wait until something more definitive comes from nullsoft. Hopefully it's just a decoding thing and the next winamp will fix it. -Jay \| Radio Toolbox.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

9th June 2003, 16:17	#2
mrdak Junior Member Join Date: Jun 2003 Posts: 5	I've got the same problem and I will be looking for a fix. I'm using a cable modem and this was the same for me with a DSL connection, and,,,,, setting the video/audio offset tweak in the preferences does nothing. I'll try a few more settings and check back. Please let me in on any thing you may find about this ok, Dr Feelgood ?:-) peace

9th June 2003, 21:24	#3
Sawg Guest Posts: n/a	I don't seem to have the delay problems. Make sure you are using Winamp 2.91 and not 2.90. There were some sync fixes in 2.91

10th June 2003, 00:54	#4
yedo Senior Member Join Date: Jun 2003 Location: Basecamp of Mt.Kailas Posts: 146	I've also got audio/video synchronized problem.I'm using ADSL line and send video stream with nsvscsrc.My problem is when I send stream long time,Audio is always go ahead(about 0.5-5sec) I've tried to fix.But I couldn't fix it. So I think This is bug of nsvscsrc.I want to know somebody's ideas.

12th June 2003, 16:07	#5
mrdak Junior Member Join Date: Jun 2003 Posts: 5	Both 2.90 and 2.91 work the same for me. My sync. problem is when I'm trying to stream the Nullsoft tv channels, and I would like to know what settings to use in the config. The offset video from audio settings in miliseconds. How many ms ???? I've tried different settings and no change. help ?? Thanks in advance.

15th June 2003, 22:03	#6
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	I have the same problem as these people and I am using winamp 2.91, it does the same

16th June 2003, 00:34	#7
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	hey I solved it guys, set the offset audio to video to -9000

16th June 2003, 00:35	#8
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	ok nm that only worked for a litle bit, what the heck

17th June 2003, 05:37	#9
mrdak Junior Member Join Date: Jun 2003 Posts: 5	I've tried that seetting along with all sorts of other settings and nothing works. I guess we are gonna have to wait for this little part of winamp to get somewhat more developed. bu bu bu bu but,,,,please post if you get it to work. I will ;-) peace,,,,mrdak

17th June 2003, 15:01	#10
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	but it works now, without doing anything it works, THEY FIXED IT

17th June 2003, 23:51	#11
mrdak Junior Member Join Date: Jun 2003 Posts: 5	Wait --------Please explain.....You say it works... do you mean it works in the internet tv section of the winamp library ? If so ........It would be soo cool if you told me what you did. or If you could tell me what type of internet connection you are using. I'm using a cable modem and all the streams are choppy and the audio and video is all out of sync. Please explain your success. My radie stations stream extreamly well. Just the internet tv stations do what I said. It would be great if I could get them to work. ???????????????????????????????????????????????????You said that they fixed it. In the 2.92 version ? or what. thanx, mrdak....*

18th June 2003, 00:18	#12
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	no I am using 2.91, I have a cable conection, everything is in sync for me, I put the offset value to 0 and all the buffer/prebuffer setings are at 3000

18th June 2003, 00:20	#13
streamingfreak Junior Member Join Date: Jun 2003 Posts: 9	I didn't think the buffer setings mattered too much though, so I figured they must have fixed the bug

18th June 2003, 20:32	#14
mrdak Junior Member Join Date: Jun 2003 Posts: 5	cool, I'll try 2.91 again and get back with you. thanks for the reply.

9th October 2003, 03:29	#17
Boadie Junior Member Join Date: Oct 2003 Posts: 1	I don't know if this helps guys, but I was about to pull my hair out trying to get OHMYTRANCE and other streams to sync with video and audio. I have finally found that I have to disable my DSP in order for it to work. If you go into your DSP section in Preferences and select None, then click on the stream you want again and it should sync just nicely. No DSP to make it sound great, but it works.