default admin's username

janworld · 14th June 2003, 19:38

What's the default admin's username (after the installation)? I've got the passwort in the 'sc_serv.ini', but not the username.
Is there somebody who can helps me?

jagwac · 14th June 2003, 19:41

username is "admin" without the quotes.

janworld · 14th June 2003, 19:46

The Server doesn't take the username 'admin' and the pass 'adminpass'.
What shall I do?

jagwac · 14th June 2003, 19:48

The username for the server is admin. It is hardcoated into the application so it can not be changed.

More than likely you are putting the wrong password in.

janworld · 14th June 2003, 19:57

When I watch into my sc_serv.ini I can see, that "adminpass" is the adminpassword. But the Server doesn't take this combination.

Tom · 14th June 2003, 19:59

Did you remove the ; from the beginning of the line and restart the DNAS so the change takes effect?

Tom

jagwac · 14th June 2003, 20:02

; ***************************
; Required stuff
; ***************************

; MaxUser. The maximum number of simultaneous listeners allowed.
; Compute a reasonable value for your available upstream bandwidth (i.e. if
; you have 256kbps upload DSL, and want to broadcast at 24kbps, you would
; choose 256kbps/24kbps=10 maximum listeners.) Setting this value higher
; only wastes RAM and screws up your broadcast when more people connect
; than you can support.
MaxUser=50

; Password. While SHOUTcast never asks a listener for a password, a
; password is required to broadcast through the server, and to perform
; administration via the web interface to this server. This server should
; consist of only letters and numbers, and is the same server your broadcaster
; will need to enter in the SHOUTcast Source Plug-in for Winamp. THIS VALUE
; CANNOT BE BLANK.
Password=changeme <--that says adminpass or changeme on your sc_serv.ini?

janworld · 14th June 2003, 20:04

Oh, 'changeme' was the adminpass.

Now it works.

Thx

jagwac · 14th June 2003, 20:06

14th June 2003, 19:38	#1
janworld Junior Member Join Date: Jun 2003 Location: Germany Posts: 11	default admin's username What's the default admin's username (after the installation)? I've got the passwort in the 'sc_serv.ini', but not the username. Is there somebody who can helps me?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

14th June 2003, 19:41	#2
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	username is "admin" without the quotes.

14th June 2003, 19:46	#3
janworld Junior Member Join Date: Jun 2003 Location: Germany Posts: 11	The Server doesn't take the username 'admin' and the pass 'adminpass'. What shall I do?

14th June 2003, 19:48	#4
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	The username for the server is admin. It is hardcoated into the application so it can not be changed. More than likely you are putting the wrong password in.

14th June 2003, 19:57	#5
janworld Junior Member Join Date: Jun 2003 Location: Germany Posts: 11	When I watch into my sc_serv.ini I can see, that "adminpass" is the adminpassword. But the Server doesn't take this combination.

14th June 2003, 19:59	#6
Tom Moderator Join Date: Apr 2000 Posts: 4,491	Did you remove the ; from the beginning of the line and restart the DNAS so the change takes effect? Tom

14th June 2003, 20:02	#7
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	; ************************* ; Required stuff ; *********************** ; MaxUser. The maximum number of simultaneous listeners allowed. ; Compute a reasonable value for your available upstream bandwidth (i.e. if ; you have 256kbps upload DSL, and want to broadcast at 24kbps, you would ; choose 256kbps/24kbps=10 maximum listeners.) Setting this value higher ; only wastes RAM and screws up your broadcast when more people connect ; than you can support. MaxUser=50 ; Password. While SHOUTcast never asks a listener for a password, a ; password is required to broadcast through the server, and to perform ; administration via the web interface to this server. This server should ; consist of only letters and numbers, and is the same server your broadcaster ; will need to enter in the SHOUTcast Source Plug-in for Winamp. THIS VALUE ; CANNOT BE BLANK. Password=changeme <--that says adminpass or changeme on your sc_serv.ini?**

14th June 2003, 20:04	#8
janworld Junior Member Join Date: Jun 2003 Location: Germany Posts: 11	Oh, 'changeme' was the adminpass. Now it works. Thx

14th June 2003, 20:06	#9
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480