streaming from delay server

anafrin · 15th June 2003, 14:19

Hello guys,

I want to stream from a other server. so not from my local ip. First I looked for a free server and I found one. It is freewebpage.com. Then I uploaded with ftp the shoutcast tool. Can somebody help me what to do now? Or are there anay other recomendations.

Greets Bernd

jagwac · 15th June 2003, 15:39

You cant host your stream from a website unless you have telnet access to the webserver.

anafrin · 15th June 2003, 15:51

i have also telnet access how i have to do it now?

jagwac · 15th June 2003, 16:04

On a free server you have telnet access?

Uh huh. Sure you do.

Whatever...telnet in and execute shoutcast-1-9-2-windows.exe if that is what you put there.

anafrin · 15th June 2003, 16:07

no it is reflex.at with 50 mb space I am there for long time. Almost the first one. I have there Telnet Access. My site also runs there Http://reflex.at/~bernd.bacher or in remote Http://jumpfm.tk

anafrin · 15th June 2003, 16:08

but how i have to config my shoutcast and the shoutcast on the server? or i only have to access the server shoutcast??

jagwac · 15th June 2003, 16:11

oh my god...I can hardly understand what you are saying here.

What is it that you want?

How to configure your shoutcast server or how to telnet into a remote server and run shoutcast?

Better yet...save us going around and around by reading this first...
http://forums.winamp.com/showthread.php?threadid=35635

anafrin · 15th June 2003, 17:11

now i have accessed the server with telnet. Then i get this:

Home:Home Page Folder:SHOUTcast: 3 Uploaded files.
1 uninst-dnas.exe 38K 15.06.2003 18:45 Uploaded File
2 sc_serv.ini 16K 15.06.2003 18:45 Uploaded File
3 sc_serv.exe 153K 15.06.2003 18:45 Uploaded File
Type an item's name or number to open it, or EXIT to exit.
Commands: Help,Logout,Exit,Read,New,Home,Delete,Scan.
> 2
Use the up/down arrow keys to select Wrom: ULHPQQWOYIYZUNNYCGPKY
XModemChecksum YModem YModem1K ZModem
Select protocol ('abort' to exit): XModemChecksum
Use Macintosh MacBinary format? No
File sc_serv.ini is 14418 bytes long.
It will take approximately 1 minute to transfer.
XModem. You have 1 minute to begin receiving. Ctrl-X to Cancel.

is this right like this?? How i can execute it?

jagwac · 15th June 2003, 17:18

Telnet help...

http://www.microsoft.com/technet/tre...t_commands.asp

anafrin · 15th June 2003, 17:36

strange I cannot expand it. I can choose xmodem xmodem1k xmodemchecksum ymodem ymodem1k and Zmodem. Do not know what is the meaning of it. then if i choose one i get: You have 11 minutes bo begin receiving.

anafrin · 15th June 2003, 17:37

Could You help me with using vnc desktop remote controll?

jagwac · 15th June 2003, 17:39

Try contacting the people that host your site and ask them for tech support.

I still cant believe that you have telnet access and they are ok with you running the server from their site.

Man...when they see the bandwidth you are going to suck up, they are SO gonna freak out.

jagwac · 15th June 2003, 17:40

Quote:

Originally posted by anafrin
Could You help me with using vnc desktop remote controll?

Sure I can help you.

Here...

http://www.uk.research.att.com/vnc/

15th June 2003, 14:19	#1
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	streaming from delay server Hello guys, I want to stream from a other server. so not from my local ip. First I looked for a free server and I found one. It is freewebpage.com. Then I uploaded with ftp the shoutcast tool. Can somebody help me what to do now? Or are there anay other recomendations. Greets Bernd

15th June 2003, 17:11	#8
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	telnet now i have accessed the server with telnet. Then i get this: Home:Home Page Folder:SHOUTcast: 3 Uploaded files. 1 uninst-dnas.exe 38K 15.06.2003 18:45 Uploaded File 2 sc_serv.ini 16K 15.06.2003 18:45 Uploaded File 3 sc_serv.exe 153K 15.06.2003 18:45 Uploaded File Type an item's name or number to open it, or EXIT to exit. Commands: Help,Logout,Exit,Read,New,Home,Delete,Scan. > 2 Use the up/down arrow keys to select Wrom: ULHPQQWOYIYZUNNYCGPKY XModemChecksum YModem YModem1K ZModem Select protocol ('abort' to exit): XModemChecksum Use Macintosh MacBinary format? No File sc_serv.ini is 14418 bytes long. It will take approximately 1 minute to transfer. XModem. You have 1 minute to begin receiving. Ctrl-X to Cancel. is this right like this?? How i can execute it?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

15th June 2003, 15:39	#2
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	You cant host your stream from a website unless you have telnet access to the webserver.

15th June 2003, 15:51	#3
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	i have also telnet access how i have to do it now?

15th June 2003, 16:04	#4
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	On a free server you have telnet access? Uh huh. Sure you do. Whatever...telnet in and execute shoutcast-1-9-2-windows.exe if that is what you put there.

15th June 2003, 16:07	#5
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	no it is reflex.at with 50 mb space I am there for long time. Almost the first one. I have there Telnet Access. My site also runs there Http://reflex.at/~bernd.bacher or in remote Http://jumpfm.tk

15th June 2003, 16:08	#6
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	but how i have to config my shoutcast and the shoutcast on the server? or i only have to access the server shoutcast??

15th June 2003, 16:11	#7
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	oh my god...I can hardly understand what you are saying here. What is it that you want? How to configure your shoutcast server or how to telnet into a remote server and run shoutcast? Better yet...save us going around and around by reading this first... http://forums.winamp.com/showthread.php?threadid=35635

15th June 2003, 17:18	#9
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	Telnet help... http://www.microsoft.com/technet/tre...t_commands.asp

15th June 2003, 17:36	#10
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	strange I cannot expand it. I can choose xmodem xmodem1k xmodemchecksum ymodem ymodem1k and Zmodem. Do not know what is the meaning of it. then if i choose one i get: You have 11 minutes bo begin receiving.

15th June 2003, 17:37	#11
anafrin Junior Member Join Date: Dec 2001 Location: The Netherlands Posts: 16	Could You help me with using vnc desktop remote controll?

15th June 2003, 17:39	#12
jagwac Senior Member Join Date: Dec 2001 Location: Minnesota Posts: 480	Try contacting the people that host your site and ask them for tech support. I still cant believe that you have telnet access and they are ok with you running the server from their site. Man...when they see the bandwidth you are going to suck up, they are SO gonna freak out.