everything downloaded now where do i go

[sinsin]

i dont know where to find link to my station or none of that,like passwords....

[angst]

did u read the instructions?

http://forums.winamp.com/showthread.php?threadid=70403

and

http://www.shoutcast.com/download/serve.phtml

[sinsin]

i read it but its not helping.....i cant find where u put in ur password and all that....

[FesterHead]

Please elborate on your problem.

Are you trying to setup the DNAS or DSP now?

***********************

Check out the Sticky post titled:
SHOUTcast: Important Info & Answers to FAQs. READ ME!

Scroll down a bit and look for the section titled:
How to Setup a Live Audio Stream -> How to set up an Internet Radio station
How to Setup a Live Audio Stream -> 15 Steps to setting up SHOUTcast

Additionally, check out these tutorials:

• HeatRadio's Basic Guide To Shoutcasting
• cyphon's setup tutorial

Please read some polite advice.

[sinsin]

the dna i think...when i open winamp up and hit ctrl p... it has out put input and all of that ,, it tells me to enter password,but where do i make up pass word,and how do i find what link my station is?

[FesterHead]

DNAS = server
DSP = source

password = defined in the DNASs sc_serv.ini configuration file (default section shown below):

code:
; Password.  While SHOUTcast never asks a listener for a password, a 

; password is required to broadcast through the server, and to perform

; administration via the web interface to this server.  This server should

; consist of only letters and numbers, and is the same server your broadcaster

; will need to enter in the SHOUTcast Source Plug-in for Winamp.  THIS VALUE

; CANNOT BE BLANK.

Password=changeme

************************

Link bot:

DNAS link: http://yourDNASip:yourDNASport
Listen link: http://yourDNASip:yourDNASport/listen.pls

Replace yourDNASip with the ip of the DNAS (SHOUTcast server) and yourDNASport with the DNAS port (default is 8000)

Example:
If your DNAS ip is 123.345.567.789 and your DNAS portBase is 2112, then your links would be:
DNAS link: http://123.345.567.789:2112
Listen link: http://123.345.567.789:2112/listen.pls

Also, if your router doesn't support local loopback then machines on the same lan as the DNAS (you) need to use the lan ip of the DNAS to connect/listen.
Machines not on the same lan as the DNAS (the rest of the world) need to use the real, world-visible ip of the DNAS to connect/listen.

Please don't give out urls with 127.0.0.1 as the ip. That is a local loopback ip.
See RFC3330 for more information.

Please don't give out urls with 192.168.x.y or 10.x.y.z or 172.(16-31).x.y as the ip. That is a private lan ip.
See RFC1918 for more information. Scroll down and look for the section titled:
3. Private Address Space

How to find your ip address (Part I).
How to find your ip address (Part II).

Finally, you can get a static name, such as foo.bar.com (not as cool as that, though ) from http://www.no-ip.com or one of the other myriad of Dynamic DNS Services.
Then, your links would be:
DNAS link: http://foo.bar.com:yourDNASport
Listen link: http://foo.bar.com:yourDNASport/listen.pls

Please read some polite advice.

[sinsin]

ok i found password......but where can i finddnasip..? man i know this is taking up time,im sorry but im losing my mind

[FesterHead]

If the DNAS and Winamp/DSP combo are on the same machine, then use "localhost" or "127.0.0.1" or "the lan ip of the DNAS if you're on a lan" (without the quotes) as the Address in the DSP.

If the DNAS and Winamp/DSP combo are on different machines but on the same lan, then use the lan ip of the DNAS as the Address in the DSP.

Else, use the real, world-visible ip of the DNAS as the Address in the DSP.

****************************

To find the DNAS ip:

From the DNAS machine

How to find your ip address (Part I).
How to find your ip address (Part II).

[djmastermind]

No worries. The DNAS IP (you) can be here. www.whatismyip.com

[edit]Disregard my post.. Fester's contains more detail.[/edit]

[sinsin]

ok thanks for the help,im getting there but slowly,......ok i got that,but im still lost......do you change the dnas on the same place i changed password?
cause i thought it was a read me type file,but i changed password......really dontknow what 2 do next.....

[djmastermind]

...?

Are the server and the source on the same machine?

[sinsin]

it say default is 8000,but i dont think thats where i put ip at is it..?

[djmastermind]

No.. 8000 is your default port.

[sinsin]

if yo got yahoo can u im me..? babyjjr0

to help,please!!!

[djmastermind]

I'm at school right now so I can't get on yahoo.. And I don't have Yahoo at home. Sorry. We'll have to do it on the tech support forums.

Did you read all of these thread mentioned in this post?

[sinsin]

yes i read it,,,i fill every thing out at sc_serv right? the configureation fourm........?right? o.k. i see no where on there where u can change ip...i see where it talks about it but under it it say default=8000 ...i got my ip# now,sorry this is just a big headach

[djmastermind]

You don't change your IP.. there's no way of doing that. To connect to your server go to your DJ Tool in WinAmp and enter 'localhost' into the address box (input tab). Port 8000. And your password.

After you try that, inform us any error messages you might happen to recieve in the server log.

[edit]typo[/edit]

[sinsin]

output one says kill..?wont connect but output three will...? anfd it say error,fatal error some thing else using..?

[djmastermind]

Originally posted by sinsin
it say error,fatal error some thing else using..?

For that error message, if I'm reading what you posted right.., read this.

[DJUndertow]

You need to go in to the DNAS and scroll down a bit there should be a line that says a pass default i think is string not sure but just change that then in the DPS just type what ever you changed it to

[djmastermind]

I did a little searching.. See if this helps, maybe.

If not, search for something like "Locking up".