Several questions

daiver · 7th June 2004, 11:36

Hello all! New broadcaster here.

I want to set up a small time radio and need some advice on the following:

a) Recommended setup. I have this board: http://www.phonic.com/images/product.../mm1002a_2.jpg and I'm thinking of getting this microphone: http://www.samsontech.com/products/p...663&brandID=2. I'm still trying to figure out a good sound card for this. Can anyone recommend something? Any comments on the above products?

b) I'm using SAM2 to broadcast to my audiorealm account. However, when I plug in the board and try to run things from the board the encoder distorts even though it doesn't sound distorted on my monitors. Does anyone know what's up?

c) How can I play phone calls on the air? Is there a special telephone that I could plug in the board or whats the deal?

Thanks for your help.

Regards,
Daiver

protegechris · 7th June 2004, 13:50

AAs for #1, I dont know.

As for #2, what bitrate areyou streaming at? 24k-56k sounds quite a bit distorted. If you wish to take out some of the muffled sound, just broadcast in mono.

#3, search the forums for this.

daiver · 8th June 2004, 10:47

Quote:

Originally posted by protegechris
AAs for #1, I dont know.

As for #2, what bitrate areyou streaming at? 24k-56k sounds quite a bit distorted. If you wish to take out some of the muffled sound, just broadcast in mono.

#3, search the forums for this.

I'm streaming at 64k and using the MP3PRO encoder. Does this influence the distortion issue?

Regards,
Daiver

clubwired nyc · 8th June 2004, 11:48

I would recommend that u run good compression for the station so u can get better sound at a lower bit rate. if you have any questions feel free to goto www.clubwiredradio.com and msg me on aim and i can help you if u need

daiver · 8th June 2004, 15:31

I am interested in contacting you but I don't have AIM. Do you have MSN or Skype?

I didn't quite understand your comment on compression.

Regards,
Daiver

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

7th June 2004, 11:36	#1
daiver Junior Member Join Date: Jun 2004 Posts: 16	Several questions Hello all! New broadcaster here. I want to set up a small time radio and need some advice on the following: a) Recommended setup. I have this board: http://www.phonic.com/images/product.../mm1002a_2.jpg and I'm thinking of getting this microphone: http://www.samsontech.com/products/p...663&brandID=2. I'm still trying to figure out a good sound card for this. Can anyone recommend something? Any comments on the above products? b) I'm using SAM2 to broadcast to my audiorealm account. However, when I plug in the board and try to run things from the board the encoder distorts even though it doesn't sound distorted on my monitors. Does anyone know what's up? c) How can I play phone calls on the air? Is there a special telephone that I could plug in the board or whats the deal? Thanks for your help. Regards, Daiver

7th June 2004, 13:50	#2
protegechris Forum Queen Join Date: Feb 2004 Location: Texarkana, Texas/Arkansas Posts: 6,635	AAs for #1, I dont know. As for #2, what bitrate areyou streaming at? 24k-56k sounds quite a bit distorted. If you wish to take out some of the muffled sound, just broadcast in mono. #3, search the forums for this. yeah, i'm back.

8th June 2004, 11:48	#4
clubwired nyc Junior Member Join Date: Jun 2004 Location: NYC Posts: 9	I would recommend that u run good compression for the station so u can get better sound at a lower bit rate. if you have any questions feel free to goto www.clubwiredradio.com and msg me on aim and i can help you if u need

8th June 2004, 15:31	#5
daiver Junior Member Join Date: Jun 2004 Posts: 16	I am interested in contacting you but I don't have AIM. Do you have MSN or Skype? I didn't quite understand your comment on compression. Regards, Daiver