input problem!

ksp69 · 17th July 2004, 22:27

ok...when i broadcast in radio on 56 kbps only songs without the "input" it's ok!, the problem is when in the "input" i chance to "soundcard input" the broadcast is cut to 5 second and after 5 second i see that it chance to 24 kbps. here is the log:
<07/18/04@00:13:48> [source] connected from 212.179.176.143
<07/18/04@00:13:50> [source] icy-name:Unnamed Server ; icy-genre:
<07/18/04@00:13:50> [source] icy-pub:1 ; icy-br:56 ; icy-url:http://www.shoutcast.com
<07/18/04@00:13:50> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A
<07/18/04@00:14:10> [source] source dropped connection. disconnecting.
<07/18/04@00:14:28> [source] connected from 212.179.176.143
<07/18/04@00:14:30> [source] icy-name:Unnamed Server ; icy-genre:
<07/18/04@00:14:30> [source] icy-pub:1 ; icy-br:24 ; icy-url:http://www.shoutcast.com
<07/18/04@00:14:30> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A

DJCassio · 17th July 2004, 22:33

Known Bug, use encoder 2

DSP :: Encoder 1 Defaults to 24 kbps When Switching Input Device Bug
Date Reported: 5/27/2002 (m/d/y)
Version: 1.8.2b (guessing 1.8.2a too)
Details: When switching the Input Device from Winamp to Soundcard Input the settings for encoder 1 are not carried over and revert back to 24 kbps, 22 kHz, Mono (encoder still shows previous bitrate but 24 kbps is streamed). Soundcard Input to Winamp works as it should.
Workaround: Do not use encoder 1 if you will be switching the Input Device frequently. If you need all five encoders then be sure to reset the bitrate on encoder 1 after switching from Winamp to Soundcard Input.
Status: Awaiting Developers Response

ksp69 · 17th July 2004, 23:01

i can't switching the encoder:when i switching the encoder from 1 to another number(2,3,4,5)i can't connect,and i try in another output(2,3,4,5)

ksp69 · 17th July 2004, 23:07

mayb have another version then not do problems

DJCassio · 18th July 2004, 01:23

You encoder does not determine if you can connect or not. Read the KNOWN BUG report again. When you switch from winamp to soundcard and back, encoder 1 doesn't remember it's previous settings. Use encoder 2, it will cure your problems. Another version is going to cause other problems. Stick with 1.8.2b.

ksp69 · 18th July 2004, 12:54

u help me.!!

Smartboy4 · 18th July 2004, 13:02

he meant just connect output 2 (instead of 1) meaning that you don't connect 1 at out . Just put in the same settings for output 2 and that should work fine .

ksp69 · 18th July 2004, 13:35

i do this!! 10x!!

17th July 2004, 22:27	#1
ksp69 Junior Member Join Date: Jul 2004 Posts: 18	input problem! ok...when i broadcast in radio on 56 kbps only songs without the "input" it's ok!, the problem is when in the "input" i chance to "soundcard input" the broadcast is cut to 5 second and after 5 second i see that it chance to 24 kbps. here is the log: <07/18/04@00:13:48> [source] connected from 212.179.176.143 <07/18/04@00:13:50> [source] icy-name:Unnamed Server ; icy-genre: <07/18/04@00:13:50> [source] icy-pub:1 ; icy-br:56 ; icy-url:http://www.shoutcast.com <07/18/04@00:13:50> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A <07/18/04@00:14:10> [source] source dropped connection. disconnecting. <07/18/04@00:14:28> [source] connected from 212.179.176.143 <07/18/04@00:14:30> [source] icy-name:Unnamed Server ; icy-genre: <07/18/04@00:14:30> [source] icy-pub:1 ; icy-br:24 ; icy-url:http://www.shoutcast.com <07/18/04@00:14:30> [source] icy-irc:#shoutcast ; icy-icq:0 ; icy-aim:N/A

17th July 2004, 22:33	#2
DJCassio Forum King Join Date: Apr 2004 Location: Denver Posts: 2,057	Known Bug, use encoder 2 DSP :: Encoder 1 Defaults to 24 kbps When Switching Input Device Bug Date Reported: 5/27/2002 (m/d/y) Version: 1.8.2b (guessing 1.8.2a too) Details: When switching the Input Device from Winamp to Soundcard Input the settings for encoder 1 are not carried over and revert back to 24 kbps, 22 kHz, Mono (encoder still shows previous bitrate but 24 kbps is streamed). Soundcard Input to Winamp works as it should. Workaround: Do not use encoder 1 if you will be switching the Input Device frequently. If you need all five encoders then be sure to reset the bitrate on encoder 1 after switching from Winamp to Soundcard Input. Status: Awaiting Developers Response Program Director, FM5280 FM5280 Smooth Contemporary Jazz Channel & Jazz Vocal Channel

18th July 2004, 01:23	#5
DJCassio Forum King Join Date: Apr 2004 Location: Denver Posts: 2,057	You encoder does not determine if you can connect or not. Read the KNOWN BUG report again. When you switch from winamp to soundcard and back, encoder 1 doesn't remember it's previous settings. Use encoder 2, it will cure your problems. Another version is going to cause other problems. Stick with 1.8.2b. Program Director, FM5280 FM5280 Smooth Contemporary Jazz Channel & Jazz Vocal Channel

18th July 2004, 12:54	#6
ksp69 Junior Member Join Date: Jul 2004 Posts: 18	thank u very much!! u help me.!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17th July 2004, 23:01	#3
ksp69 Junior Member Join Date: Jul 2004 Posts: 18	i can't switching the encoder:when i switching the encoder from 1 to another number(2,3,4,5)i can't connect,and i try in another output(2,3,4,5)

17th July 2004, 23:07	#4
ksp69 Junior Member Join Date: Jul 2004 Posts: 18	mayb have another version then not do problems

18th July 2004, 13:02	#7
Smartboy4 Junior Member Join Date: Oct 2003 Posts: 22	he meant just connect output 2 (instead of 1) meaning that you don't connect 1 at out . Just put in the same settings for output 2 and that should work fine .

18th July 2004, 13:35	#8
ksp69 Junior Member Join Date: Jul 2004 Posts: 18	i do this!! 10x!!