Can you use a different port on shoutcast dns server than 8000 and 8001?

batistabombv3 · 25th February 2006, 19:33

casue i have a message that says:
*******************************************************************************
** SHOUTcast Distributed Network Audio Server
** Copyright (C) 1998-2004 Nullsoft, Inc. All Rights Reserved.
** Use "sc_serv filename.ini" to specify an ini file.
*******************************************************************************

Event log:
<02/25/06@15:33:38> [SHOUTcast] DNAS/win32 v1.9.5 (Dec 27 2004) starting up...
<02/25/06@15:33:38> [main] loaded config from C:\Program Files\SHOUTcast\sc_serv.ini
<02/25/06@15:33:38> [main] initializing (usermax:10 portbase:8000)...
<02/25/06@15:33:38> [main] No ban file found (sc_serv.ban)
<02/25/06@15:33:38> [main] No rip file found (sc_serv.rip)
<02/25/06@15:33:38> [main] opening source socket
<02/25/06@15:33:38> [main] error opening source socket! FATAL ERROR! Some other process is using this port!

MegaRock · 25th February 2006, 19:46

First off check your config file. If you put an IP address in DestIP= and/or SrcIP= then take those out and leave it at ANY. This setting is normally only used if you are a service provider running multiple servers and have multiple IP's. This is likely causing your error.

You can of course use any port for the server so long as it's not being used by anything else.

batistabombv3 · 25th February 2006, 19:54

ha ha ha!

fc*uk · 25th February 2006, 19:56

looks yummie.

drewbar · 25th February 2006, 19:56

PortBase=8000 just change that.
Also, might want to change your password now.

batistabombv3 · 25th February 2006, 19:58

Quote:

Originally posted by drewbar
PortBase=8000 just change that.
Also, might want to change your password now.

done now no one can hack me!

fc*uk · 27th February 2006, 00:38

fyi: not that am going to do it (because I have better things to do with my time), but when there is a will, there is ALYWAS a way. Now, who would want to go after an independant 'caster is well beyond me .... but then again, to cover my ass I use Libranet Linux!!!!

batistabombv3 · 27th February 2006, 01:21

Quote:

Originally posted by MegaRock
First off check your config file. If you put an IP address in DestIP= and/or SrcIP= then take those out and leave it at ANY. This setting is normally only used if you are a service provider running multiple servers and have multiple IP's. This is likely causing your error.

You can of course use any port for the server so long as it's not being used by anything else.

Everything is the same but i still have the same problem!

Slim3967 · 27th February 2006, 21:25

your still having the same problem too, well one of these guys know the trick to this hole thing, if there is someone that had the same problem like us that maybe they can just tell us if they know how to opean the right ports using XP or if we missed something in the Audio Server configuration that needs to be changed then please just let us know. and no web site cause everone's computer is not the same.

batistabombv3 · 27th February 2006, 21:36

Quote:

Originally posted by Slim3967
your still having the same problem too, well one of these guys know the trick to this hole thing, if there is someone that had the same problem like us that maybe they can just tell us if they know how to opean the right ports using XP or if we missed something in the Audio Server configuration that needs to be changed then please just let us know. and no web site cause everone's computer is not the same.

oh where can i met him?

fc*uk · 27th February 2006, 21:40

if the problem is still some other process using that port, then you still got instances of dnas running. Remember, clicking that damn 'x' in the cornet does not shutdown the server ... if dnas is not running, then look in the task manager of other threads still running that were not killed (sometimes dnas does not exit well).

batistabombv3 · 27th February 2006, 21:51

Quote:

Originally posted by fc*uk
if the problem is still some other process using that port, then you still got instances of dnas running. Remember, clicking that damn 'x' in the cornet does not shutdown the server ... if dnas is not running, then look in the task manager of other threads still running that were not killed (sometimes dnas does not exit well).

i don't have 2 run n00b

fc*uk · 27th February 2006, 21:59

wtf????

batistabombv3 · 27th February 2006, 22:03

Quote:

Originally posted by fc*uk
wtf????

i don't have 2 shoucast server running ok!

fc*uk · 27th February 2006, 22:07

then you have set something else up to run on this port. change the ports in the config file. Make sure the port used is greater than 1024.

25th February 2006, 19:33	#1
batistabombv3 Junior Member Join Date: Jan 2006 Location: Windsor,On,Canada Posts: 36	Can you use a different port on shoutcast dns server than 8000 and 8001? Can you use a different port on shoutcast dns server than 8000 and 8001? casue i have a message that says: ***************************************************************************** SHOUTcast Distributed Network Audio Server Copyright (C) 1998-2004 Nullsoft, Inc. All Rights Reserved. Use "sc_serv filename.ini" to specify an ini file. ******************************************************************************* Event log: <02/25/06@15:33:38> [SHOUTcast] DNAS/win32 v1.9.5 (Dec 27 2004) starting up... <02/25/06@15:33:38> [main] loaded config from C:\Program Files\SHOUTcast\sc_serv.ini <02/25/06@15:33:38> [main] initializing (usermax:10 portbase:8000)... <02/25/06@15:33:38> [main] No ban file found (sc_serv.ban) <02/25/06@15:33:38> [main] No rip file found (sc_serv.rip) <02/25/06@15:33:38> [main] opening source socket <02/25/06@15:33:38> [main] error opening source socket! FATAL ERROR! Some other process is using this port!

25th February 2006, 19:46	#2
MegaRock Forum King Join Date: Jun 2003 Location: Inside my water bong Posts: 6,775	First off check your config file. If you put an IP address in DestIP= and/or SrcIP= then take those out and leave it at ANY. This setting is normally only used if you are a service provider running multiple servers and have multiple IP's. This is likely causing your error. You can of course use any port for the server so long as it's not being used by anything else. 1001. FM - Megarock Radio - St. Louis Since 1998! Tune In Now! Corporate Radio Sucks! No suits, all rock!

25th February 2006, 19:56	#4
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 7,997	looks yummie. last.fm \| UK Hard House \| Progressive House \| Are You Hard?

25th February 2006, 19:56	#5
drewbar Sawg 2.0 Major Dude Join Date: Mar 2004 Posts: 5,917	PortBase=8000 just change that. Also, might want to change your password now. Count with us! Jan 1st, 12AM (PST, GMT -8) 2010 - 282,246

27th February 2006, 00:38	#7
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 7,997	fyi: not that am going to do it (because I have better things to do with my time), but when there is a will, there is ALYWAS a way. Now, who would want to go after an independant 'caster is well beyond me .... but then again, to cover my ass I use Libranet Linux!!!! last.fm \| UK Hard House \| Progressive House \| Are You Hard?

25th February 2006, 19:54	#3
batistabombv3 Junior Member Join Date: Jan 2006 Location: Windsor,On,Canada Posts: 36	ha ha ha!

27th February 2006, 21:25	#9
Slim3967 Member Join Date: Feb 2006 Location: Toronto,Ca Posts: 50	your still having the same problem too, well one of these guys know the trick to this hole thing, if there is someone that had the same problem like us that maybe they can just tell us if they know how to opean the right ports using XP or if we missed something in the Audio Server configuration that needs to be changed then please just let us know. and no web site cause everone's computer is not the same.

27th February 2006, 21:40	#11
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 7,997	if the problem is still some other process using that port, then you still got instances of dnas running. Remember, clicking that damn 'x' in the cornet does not shutdown the server ... if dnas is not running, then look in the task manager of other threads still running that were not killed (sometimes dnas does not exit well). last.fm \| UK Hard House \| Progressive House \| Are You Hard?

27th February 2006, 21:59	#13
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 7,997	wtf???? last.fm \| UK Hard House \| Progressive House \| Are You Hard?

27th February 2006, 22:07	#15
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 7,997	then you have set something else up to run on this port. change the ports in the config file. Make sure the port used is greater than 1024. last.fm \| UK Hard House \| Progressive House \| Are You Hard?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode