SHOUTcast + D-Link

Groovie · 27th March 2006, 15:33

Okay I've spent a lot of time reading in the forum and other help sites about how to get shoutcast to work with d-link.

I finally found what I needed and went to fix the settings in the router (192.168.0.1).
I write everything right but when Im pressing "Apply" nothing happens. BUT if I leave the Private IP box empty and press Apply, a new box pops up saying I have to fill in the IP.
So the Apply button must be working..but what's the problem?

I even tried to add shoucast in the router on both computers, still same thing.

And if you go to some other option, like Firewall or something else, then the apply button works. But not on the Virtual Server settings, which is the one I need.

Can anyone help?

hackerdork · 27th March 2006, 16:40

Contact DLINK !

You need to enter the IP address of the PC which is the private IP address is talking about. The router is 192.168.0.1 , but what is the address of the PC running Winamp with the shoutcast DNAs?? That is what you need to enter in the router setup.

Again contact DLINK if you need help with their NAT setup on their router.

~ DK

Groovie · 27th March 2006, 16:56

yes I know, thats what Ive done. The PCs IP.

dotme · 27th March 2006, 18:01

Many D-Link routers require a restart after changing port forwarding settings. Make sure you reboot the router after saving changes.

Groovie · 28th March 2006, 10:30

But thats the thing, I cant save anything...Since the apply button wont do anything.

Evil Lu · 28th March 2006, 10:57

router ip= 192.168.0.1
pc ip should equal 192.168.0.x
x being any number that's not 1
http://sp0rky-n00b.co.uk/staticip/ see here.

Groovie · 28th March 2006, 11:22

yes yes I know. Ive done everything right, the problem is the apply button that wont work, when I press it, nothing happens, so I cant save anything new.
Does anyone know what I can do or at least try?

dotme · 28th March 2006, 11:49

Factory reset? Last resort...

hackerdork · 28th March 2006, 12:52

Hello DLINK tech support. Your firmware is pooop, I need help...

Call em, see if there are updates for their hardware. you would be surprised how many routers are sold with old shit firmware (most of which can be installed with a simple download).

Press the http://support.dlink.com/ easy button.

~ DK

27th March 2006, 15:33	#1
Groovie Junior Member Join Date: Mar 2006 Posts: 4	SHOUTcast + D-Link Okay I've spent a lot of time reading in the forum and other help sites about how to get shoutcast to work with d-link. I finally found what I needed and went to fix the settings in the router (192.168.0.1). I write everything right but when Im pressing "Apply" nothing happens. BUT if I leave the Private IP box empty and press Apply, a new box pops up saying I have to fill in the IP. So the Apply button must be working..but what's the problem? I even tried to add shoucast in the router on both computers, still same thing. And if you go to some other option, like Firewall or something else, then the apply button works. But not on the Virtual Server settings, which is the one I need. Can anyone help?

27th March 2006, 16:40	#2
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	Contact DLINK ! You need to enter the IP address of the PC which is the private IP address is talking about. The router is 192.168.0.1 , but what is the address of the PC running Winamp with the shoutcast DNAs?? That is what you need to enter in the router setup. Again contact DLINK if you need help with their NAT setup on their router. ~ DK ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

27th March 2006, 18:01	#4
dotme Moderator Join Date: Feb 2005 Location: USA Posts: 3,994	Many D-Link routers require a restart after changing port forwarding settings. Make sure you reboot the router after saving changes. Atlantic Sound Factory Licensed by LoudCity since 2005 \| Hosted by Fast Serv Stream Hosting

28th March 2006, 11:49	#8
dotme Moderator Join Date: Feb 2005 Location: USA Posts: 3,994	Factory reset? Last resort... Atlantic Sound Factory Licensed by LoudCity since 2005 \| Hosted by Fast Serv Stream Hosting

28th March 2006, 12:52	#9
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	Hello DLINK tech support. Your firmware is pooop, I need help... Call em, see if there are updates for their hardware. you would be surprised how many routers are sold with old shit firmware (most of which can be installed with a simple download). Press the http://support.dlink.com/ easy button. ~ DK ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

27th March 2006, 16:56	#3
Groovie Junior Member Join Date: Mar 2006 Posts: 4	yes I know, thats what Ive done. The PCs IP.

28th March 2006, 10:30	#5
Groovie Junior Member Join Date: Mar 2006 Posts: 4	But thats the thing, I cant save anything...Since the apply button wont do anything.

28th March 2006, 10:57	#6
Evil Lu Forum Maitresse Join Date: Mar 2005 Location: I'm hiding under your bed Posts: 2,974	router ip= 192.168.0.1 pc ip should equal 192.168.0.x x being any number that's not 1 http://sp0rky-n00b.co.uk/staticip/ see here.

28th March 2006, 11:22	#7
Groovie Junior Member Join Date: Mar 2006 Posts: 4	yes yes I know. Ive done everything right, the problem is the apply button that wont work, when I press it, nothing happens, so I cant save anything new. Does anyone know what I can do or at least try?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode