How Can I.....?

Cypher Jax · 13th May 2006, 03:11

I'm a newby in this thing of shoutcast, im peruvian so forgive my english mistakes.

Well, I want to know, every time y put the microfone to talk, my firends can only listen my voice.

I want my voice being listened while the music is low behind my voice.

I hope you can understand my problem.

Thanks For Everything

Calgamerr · 13th May 2006, 03:49

Well I'm not too good with this stuff either, but as far as i know, thats not possible

Cypher Jax · 13th May 2006, 04:20

isn't there a plugging the alow to use the microphone while playing the music and regulate betwing microphone volume and music volumen

just like jetcast pluging

VIPrecordsInc · 24th May 2006, 05:23

I can only tell you how to do this if you are using a pc. Although I don't think it differs that much...OK you ready? Here we go...

First you have to open WINAMP.
If you don't have your Shoutcast Source open, you can open it by going to "options" then "preferences" or press "ctrl+P".

Once you have that open go to "PLUG-INS" then "DSP/Effect" then select: "Nullsoft SHOUT cast Source DSP v1.9.0 [dsp_sc.dll]

Highlight it and close the window.
The source should be open.
Then you want to click the "INPUT" tab at the top of the SOURCE window. Change the "input device" from WINAMP(Recommended) to "SOUNDCARD INPUT". That will open a widow where you can adjust everything.

Make sure all of your pc sounds are turned off because it will be broadcasted over your stream.

After making your adjustments should be good.
And don't forget to plug the mic into the pc...lol

Hope this helps.

Nick@ss · 24th May 2006, 06:03

http://www.streamsolutions.co.uk/fla...als/Decks_mic/

this might help....

striff17 · 31st May 2006, 23:45

I have the same problem...

I done the tutorial, but... nothing changed. I done EXACTLY like says there but nothing... I talk to the mic but the music isn't broadcasting anymore in the "background"

Why ? I have soundcard onboard: C-Media 3D Audio VIA 3059 Series audio controller . Or something like that...

Please ... I need help !!

Nick@ss · 1st June 2006, 16:18

maybe you havent set the volumes up

post images of your recording and playback mixers if you can and we may be able to point you in the right direction...

davmil76 · 1st June 2006, 21:26

You could always buy a mixer, would be like this Music source into mixer on a channel, Mic into mixer on a channel, and have the out going into your pc that you are streaming with... and a cheep mixer would do... you might even find a software driven one.

Good Luck

13th May 2006, 03:11	#1
Cypher Jax Junior Member Join Date: May 2006 Posts: 8	How Can I.....? I'm a newby in this thing of shoutcast, im peruvian so forgive my english mistakes. Well, I want to know, every time y put the microfone to talk, my firends can only listen my voice. I want my voice being listened while the music is low behind my voice. I hope you can understand my problem. Thanks For Everything

24th May 2006, 06:03	#5
Nick@ss Moderator Join Date: Nov 2004 Location: Streamsolutions Headquarters Posts: 11,953	http://www.streamsolutions.co.uk/fla...als/Decks_mic/ this might help.... www.streamsolutions.co.uk SHOUTcast \| Flash Media \| Windows Media \| Icecast 2 \| Content Delivery \|

1st June 2006, 16:18	#7
Nick@ss Moderator Join Date: Nov 2004 Location: Streamsolutions Headquarters Posts: 11,953	maybe you havent set the volumes up post images of your recording and playback mixers if you can and we may be able to point you in the right direction... www.streamsolutions.co.uk SHOUTcast \| Flash Media \| Windows Media \| Icecast 2 \| Content Delivery \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

13th May 2006, 03:49	#2
Calgamerr Junior Member Join Date: May 2006 Location: Westminster, MD Posts: 11	Well I'm not too good with this stuff either, but as far as i know, thats not possible

13th May 2006, 04:20	#3
Cypher Jax Junior Member Join Date: May 2006 Posts: 8	isn't there a plugging the alow to use the microphone while playing the music and regulate betwing microphone volume and music volumen just like jetcast pluging

24th May 2006, 05:23	#4
VIPrecordsInc Junior Member Join Date: Aug 2005 Location: USA Posts: 12	I can only tell you how to do this if you are using a pc. Although I don't think it differs that much...OK you ready? Here we go... First you have to open WINAMP. If you don't have your Shoutcast Source open, you can open it by going to "options" then "preferences" or press "ctrl+P". Once you have that open go to "PLUG-INS" then "DSP/Effect" then select: "Nullsoft SHOUT cast Source DSP v1.9.0 [dsp_sc.dll] Highlight it and close the window. The source should be open. Then you want to click the "INPUT" tab at the top of the SOURCE window. Change the "input device" from WINAMP(Recommended) to "SOUNDCARD INPUT". That will open a widow where you can adjust everything. Make sure all of your pc sounds are turned off because it will be broadcasted over your stream. After making your adjustments should be good. And don't forget to plug the mic into the pc...lol Hope this helps.

31st May 2006, 23:45	#6
striff17 Junior Member Join Date: May 2006 Location: RO / TM Posts: 2	I have the same problem... I done the tutorial, but... nothing changed. I done EXACTLY like says there but nothing... I talk to the mic but the music isn't broadcasting anymore in the "background" Why ? I have soundcard onboard: C-Media 3D Audio VIA 3059 Series audio controller . Or something like that... Please ... I need help !!

1st June 2006, 21:26	#8
davmil76 Junior Member Join Date: Sep 2005 Location: Virginia Posts: 25	You could always buy a mixer, would be like this Music source into mixer on a channel, Mic into mixer on a channel, and have the out going into your pc that you are streaming with... and a cheep mixer would do... you might even find a software driven one. Good Luck