Receiving Authorization Response

KuTsuM · 14th May 2006, 19:11

Hi, I know that people have asked this question plenty times before, and I have looked through them all and have found no answer. As usual, I connect through the DSP plugin and all it says is Receiving Authorization Response, however, the connection is actual established (confirmed through netstat), yet no information is passed between the two connections. Through the GUI, no message is even said that there was an established connection between the two. I figure it's probably something wrong with my configuration, so here it is

Quote:

PortBase=8004
MaxUser=10
Password=passwordhere
AdminPassword=adminpass
PublicServer=1
SrcIP=127.0.0.1
DestIP=127.0.0.1

Thanks for any help

Nick@ss · 14th May 2006, 21:10

What IP address did you put inside the DSP? try using 127.0.0.1 if you have winamp and the sc_serv running on the same PC.

post the server ip so we can se if the server is active and ready to go..

hackerdork · 14th May 2006, 23:01

Also make sure you use port 8004, not 8005 even though that will be listed as on of the last things in the sc_sev.log

~ D

KuTsuM · 15th May 2006, 19:32

I know I had it all set up right, server is running, and the connection was confirmed established by netstat, yet for some reason nothings passed through. I try to connect to the web page through port 8005 from my firefox to see if it's even online, and the connection is established, but no data is sent, and the connection is never closed unless force closed by me

hackerdork · 15th May 2006, 22:23

Use port 8004 for the web interface as well. not 8005 like you indicated.

~ D

14th May 2006, 21:10	#2
Nick@ss Moderator Join Date: Nov 2004 Location: Streamsolutions Headquarters Posts: 11,953	What IP address did you put inside the DSP? try using 127.0.0.1 if you have winamp and the sc_serv running on the same PC. post the server ip so we can se if the server is active and ready to go.. www.streamsolutions.co.uk SHOUTcast \| Flash Media \| Windows Media \| Icecast 2 \| Content Delivery \|

14th May 2006, 23:01	#3
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	Also make sure you use port 8004, not 8005 even though that will be listed as on of the last things in the sc_sev.log ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

15th May 2006, 22:23	#5
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	Use port 8004 for the web interface as well. not 8005 like you indicated. ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15th May 2006, 19:32	#4
KuTsuM Junior Member Join Date: May 2006 Posts: 2	I know I had it all set up right, server is running, and the connection was confirmed established by netstat, yet for some reason nothings passed through. I try to connect to the web page through port 8005 from my firefox to see if it's even online, and the connection is established, but no data is sent, and the connection is never closed unless force closed by me