I need help! Aaah!

ksax · 15th May 2006, 01:42

I typed the server names (relay) in from the edit config (unchanged) on the server (i think it's called DNAS, not sure...) and then put it into the edit source or something like that (where it said to put it on the readme file,) and it didn't work!

Could someone please help? Thanks!

fc*uk · 15th May 2006, 01:49

hmmm could you be a little more clear? What did not work and what errors are you getting?

ksax · 15th May 2006, 01:52

it says that it's connecting but then it says right away disconnected.

hackerdork · 15th May 2006, 01:58

whos is hosting the shoutcast server ? are you running it on the same computer as winamp? You would connect to 127.0.0.1 (localhost) not a website name etc.

Post the output of the log if you have any, just the last 10-20 lines of the log.

~ D

fc*uk · 15th May 2006, 01:58

so you are having trouble getting the dsp to connect to dnas? If yes, then the password must have been wrong. The default password is chamgeme. If you did change the password, then make sure you did not have any spaces in what ever you used, as dnas can not handle this.

Finally, did you change the srcIP or destIP??? These should both be set to any. Additionally, the address in the output tab in the dsp should be localhost. If it is and that still is not working, then try using 127.0.0.1

Let me know if this fixes anything for you.

ksax · 15th May 2006, 02:06

one final question, what do you do from here?

ksax · 15th May 2006, 02:07

oh yeah, i am connected now. to clarify, how do you broadcast?

fc*uk · 15th May 2006, 02:13

build a playlist in winamp, open the dsp and have it connect to dnas, pressplay on winamp and you are all set.

Something tells me you want to know your tune in ip: www.whatismyip.com --- take that number and add http://Number:8000/listen.pls

Something also tells me that you probably do not have your router setup for portforwarding. Check here: http://www.canyouseeme.org/ and type in port 8000 while you are broadcasting. If it actually works, then you have nothing left to do and you are all set. If it fails, then go here: www.portforward.com and select your router, then select SHOUTcast as the application ... it will walk you through all of the steps needed to setup your router for port forwarding.

ksax · 15th May 2006, 02:14

one final question, how do i give my station a name???

fc*uk · 15th May 2006, 02:16

in the description box of the dsp.

hackerdork · 15th May 2006, 02:32

open the README file too and use SEARCH. blah blah blah.

it helps!

~ D

fc*uk · 15th May 2006, 02:34

Quote:

Originally posted by hackerdork
open the README file too and use SEARCH. blah blah blah.

it helps!

~ D

No doubt it does!!!!!!!

And just for fun....

15th May 2006, 01:42	#1
ksax Junior Member Join Date: May 2006 Location: Minnesota Posts: 5	I need help! Aaah! I typed the server names (relay) in from the edit config (unchanged) on the server (i think it's called DNAS, not sure...) and then put it into the edit source or something like that (where it said to put it on the readme file,) and it didn't work! Could someone please help? Thanks!

15th May 2006, 01:49	#2
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	hmmm could you be a little more clear? What did not work and what errors are you getting? Trancectro/electro-house/electro \| Are You Hard?

15th May 2006, 01:58	#4
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	whos is hosting the shoutcast server ? are you running it on the same computer as winamp? You would connect to 127.0.0.1 (localhost) not a website name etc. Post the output of the log if you have any, just the last 10-20 lines of the log. ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

15th May 2006, 01:58	#5
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	so you are having trouble getting the dsp to connect to dnas? If yes, then the password must have been wrong. The default password is chamgeme. If you did change the password, then make sure you did not have any spaces in what ever you used, as dnas can not handle this. Finally, did you change the srcIP or destIP??? These should both be set to any. Additionally, the address in the output tab in the dsp should be localhost. If it is and that still is not working, then try using 127.0.0.1 Let me know if this fixes anything for you. Trancectro/electro-house/electro \| Are You Hard?

15th May 2006, 02:13	#8
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	build a playlist in winamp, open the dsp and have it connect to dnas, pressplay on winamp and you are all set. Something tells me you want to know your tune in ip: www.whatismyip.com --- take that number and add http://Number:8000/listen.pls Something also tells me that you probably do not have your router setup for portforwarding. Check here: http://www.canyouseeme.org/ and type in port 8000 while you are broadcasting. If it actually works, then you have nothing left to do and you are all set. If it fails, then go here: www.portforward.com and select your router, then select SHOUTcast as the application ... it will walk you through all of the steps needed to setup your router for port forwarding. Trancectro/electro-house/electro \| Are You Hard?

15th May 2006, 01:52	#3
ksax Junior Member Join Date: May 2006 Location: Minnesota Posts: 5	it says that it's connecting but then it says right away disconnected.

15th May 2006, 02:06	#6
ksax Junior Member Join Date: May 2006 Location: Minnesota Posts: 5	one final question, what do you do from here?

15th May 2006, 02:07	#7
ksax Junior Member Join Date: May 2006 Location: Minnesota Posts: 5	oh yeah, i am connected now. to clarify, how do you broadcast?

15th May 2006, 02:14	#9
ksax Junior Member Join Date: May 2006 Location: Minnesota Posts: 5	one final question, how do i give my station a name???

15th May 2006, 02:16	#10
fcuk Moderator* Join Date: Dec 2005 Location: Atlantic Beach Posts: 8,140	in the description box of the dsp. Trancectro/electro-house/electro \| Are You Hard?

15th May 2006, 02:32	#11
hackerdork Forum King Join Date: Feb 2006 Location: Earth Circa sometime. Posts: 3,297	open the README file too and use SEARCH. blah blah blah. it helps! ~ D ~ According to the ship's log we're down to our last 3000 vomit bags.It'll never be enough. search the forums! don't PM me on how-to, or ask me to setup you system. you do it so you learn.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode