|
|
#1 |
|
Junior Member
Join Date: Nov 2007
Posts: 2
|
How to get shoutcast working?
Dear all,
first of all I wanna say that I used search feature but I didn't get the results I was looking for. I read some faq's and readme's and so on, too. I just want to know how to set up shoutcast as server and how to configure it so that it works. I already uploaded and installed sc_serv on my server. I started it in ssh mode and there was no error message or something. Then I tried to connect to server with winamp - it worked, too (bytes were submitted) But if I start winamp on another computer to be a listener, the message "ICY 401 Can't connect to serverip ort"My winamp has right configuration and plugins, because it already worked with another server, but now I want to set up a server by myself so what is wrong? I read something about sc_trans. Is it needed, too for setting up a server? Thanks and looking forward to your comments l34t |
|
|
|
|
|
#2 |
|
Moderator
Join Date: Nov 2004
Location: Streamsolutions Headquarters
Posts: 11,966
|
if you are streaming to the server from winamp you do not need sc trans,
are there any errors in the logs? post an ip / port so we can look and see for ourselves |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Nov 2007
Posts: 2
|
ip:85.25.150.217
port:8000 Port 8000 is written in sc_serv.conf code: Thanks for the help |
|
|
|
|
|
#4 |
|
Moderator
Join Date: Apr 2000
Posts: 4,485
|
From the log posted a source was never connected, however tune-in attempts were made so the DNAS will give a 401 Service Unavailable. I can see your DNAS page so there doesn't appear to be anything blocking the DNAS. Try connecting a source again then use the link at: http://85.25.150.217:8000
Tom |
|
|
|
![]() |
|
|||||||
| Thread Tools | Search this Thread |
| Display Modes | |
|
|