Post All Winamp 5.21 Official Plugin Bug Reports In This Thread

[DJ Egg]

Report ALL Winamp 5.21 Plugin bugs in this thread ONLY.

ALL OTHER REPORTS WILL BE DELETED.
(YOU HAVE BEEN WARNED)

Here is a LIST of the Official Plugins and their Versions that shipped with 5.21

Input:
Nullsoft MPEG Audio Decoder 3.5 [in_mp3.dll]
Nullsoft MIDI player 3.1 [in_midi.dll]
Nullsoft CD plug-in (CDDB2) v3.13 [in_cdda.dll]
Nullsoft Waveform Decoder v3.0 [in_wave.dll]
Nullsoft DirectShow Decoder v0.98 [in_dshow.dll]
Nullsoft Vorbis Decoder v1.44 [in_vorbis.dll]
Nullsoft Module Decoder v2.2.2 [in_mod.dll]
Nullsoft NSV Decoder v1.07 [in_nsv.dll]
Nullsoft MPEG-4 Audio Decoder v0.8 [in_mp4.dll]
Nullsoft Windows Media Decoder 3.1 [in_wm.dll]
Nullsoft LineIn plugin v3.11 [in_linein.dll]

Output:
DirectSound Output v2.42 (d) [out_ds.dll]
Waveout output v2.1 (d) [out_wave.dll]
Nullsoft Disk Writer Plug-in v2.11 [out_disk.dll]

Visualization:
Advanced Visualization Studio v2.81b [vis_avs.dll]
MilkDrop 1.04d [vis_milk.dll]
Nullsoft Tiny Fullscreen 2001 v2.07 [vis_nsfs.dll]

DSP/FX:
Nullsoft Signal Processing Studio DSP v0.36 [dsp_sps.dll]

CD Ripping Encoders:
AAC/aacPlus Encoder v1.2 [enc_aacplus.dll]
MP4 AAC/aacPlus Encoder v1.2 [enc_aacplus.dll]
MP3 Encoder v1.3 [enc_lame.dll] (with lame_enc.dll 3.97 b2)
WAV Output (built-in)
WMA Encoder v1.1 [enc_wma.dll]

General Purpose:
Nullsoft Tray Control v1.0 [gen_tray.dll]
Nullsoft Global Hotkeys v1.31 [gen_hotkeys.dll]
Nullsoft Winamp Library v2.3 [gen_ml.dll]
Nullsoft Modern Skins Support v1.11 [gen_ff.dll]
Jump To File Extra v0.97 R (build 16) [gen_jumpex.dll]

Media Library:
SHOUTcast Wire v1.03 [ml_wire.dll]
Online Services v1.00 [ml_online.dll]
ml_xpdxs (Predixis MusicMagic) v1.0.4 [ml_xpdxs.dll]
Portable Music Player Support v1.0 [ml_pmp.dll]

Portables:
Creative NJB Plug-in v0.2 [pmp_njb.dll]
iPod Plug-in v0.4 [pmp_ipod.dll]
Microsoft Plays For Sure Plug-in v0.4 [pmp_p4s.dll]

____________________________________________________________


Provide the following Information with every Report, and with every CONFIRMATION of someone else's report:

Winamp 5.21 - clean install (with NO 3rd-party plugins)
Windows OS, including Service Pack
System specs (mobo, cpu, ram)
Video Card, Video Card Drivers version
Sound Card, Sound Card Drivers version
DirectX version
Plugin and Plugin version affected by/causing the bug


If applicable, also include Error Logs and/or FULL Error Messages.

To reproduce some bugs, we may also need a link to a zipped sample file
(eg. an .mp3, .aac, .wav, .mid file, etc).

The more information you provide US, the Faster we can or will help you.

Incomplete/lame (aka: impossible to reproduce) reports will probably just be ignored.


Do NOT report ANY 3rd-party plugin bugs/issues here.
Report them to the author(s) instead (and point them to the 5.04 sdk)



Maintained by DJ Egg

[amano]

Hmm. Someone reported this in the official winamp 5.2 thread:

[IN THE SHOUTCAST BROWSER] Furthermore, if you use your scroll-wheel the player freezes.

In another forum he mentioned that you would have to move the wheel fast. Can someone reproduce that?

[Edit --> DJ Egg]
Nope :/

[Anders]

Borked ML tree icons on 2k



WA 5.2 Clean install (except install.ini)
Win2k Eng
DX 7 (4.07.00.0700)
P3 500MHz, 128mb RAM
Voodoo3 3000 (5.00.2180.0058 Eng)

[colorspace]

aac≠mp3. Also discussed here.

[DummyDDD]

playlist title bug related to directshow filter 0.98

[edit]
Forgot to mention the technical stuff:
WA 5.2 Clean install
WinXP Pro Danish SP2
P4 2666MHz, 512mb RAM
Graphics card: SiS M650_651_650_740, 6.14.0010.2220 (eng)
Sound card: Realtek AC97, 5.10.0000.5990 (eng)
DX 9 (4.09.0000.0904)
At least directshow decoder 0.98 is affected, maybe others.
[/edit]

I am not quite sure if this is a bug in the plug-in or a general bug in the playlist, but I'll post it here anyway.

If I doubleclick on a file in the playlist the playlength of the file is displayed to the left of the file (which is fine), but when I afterwards click on another file it no longer displays the playlength. It seems that it looses the playlength whenever I change focus in the playlist (however only when using the mouse, not when using keyboard).
Also it only loose the playlength if the file was decoded using the directshow filter plug-in, and winamp was unable to determine the bitrate of the file.
Actually it might also happen if other plug-ins are unable to determine the bitrate, but I haven't encountered such cases. Actually I think it's because of my directshow decoder filter that winamp is unable to get the bitrate (I use FFDshow).

The bug also happened in the previous beta, I think it started occuring after you posted something about fixing some kind of a title bug, but I'm not sure.

[kzuse]

"Sorry, online Services could not load. Please post an angry message in the Forums".

THIS IS AN ANGRY MESSAGE!!!

>> I want the old browser back! It simply worked, and the new one does not! it shows a mostly black window and that's all!

Where can I enter a search e.g. for jazz radio channels, as i could do it before 5.2? all the input fields are gone.

I will definitively go back to version 5.13. And now don't tell me your update stuff yes bla bla it's always the same, really. Not only that I can't play back a lot of my ACM wave files (what I can somewhat "repair" by using the old in_wave plugin), NO also the online media is gone. very cool. thanks. <<

Was this message angry enough? At least I am.

[kzuse]

//ADDITION: I forget one other thing: now after this "funny" dialog box it asked me to start the debug mode?? I said yes. The following was presented to me, as you see in the file "debug.gif". //

[kzuse]

And another (real) bug report:

in_wave (the new one of course) doesn't play normal (uncompressed PCM) wave files if they contain Meta information ("LIST information") at the beginning.

If this information is at the end of the file (at it should be...) it's no problem, then it even shows that information in Winamps scolling bar. (fine!)

Clean install.

Here's a link to a file that won't play. It contains some LIST chunk at its beginning, with information that it was created by Goldwave.

http://home.arcor.de/ggabi/pub/strek.wav

Regards, kzuse

PS: The old in_wave (which I continue using because of the RIFF-MP3 bug, and which was fully OK since i almost never played 32bit WAV's) did correctly play this file !!!!

[CraigF]

Its called a trade off. libsndfile supports many many many more variations of wave files. however, it has less tollerence for invalid or dodgy wave files.

[Spiff0x0]

Microsoft Plays For Sure Plug-in v0.3 [pmp_p4s.dll]

Winamp 5.2 - Clean Install
Windows XP Home - SP1
Pentium M @ 1.3Ghz - 1Gb RAM
ATI Mobility Radeon 9200 - Driver 6.14.10.6422
SoundMAX Integrated Digital Audio - Driver 5.12.1.3571
DirectX 9.0c
Microsoft Plays For Sure Plug-in v0.3 [pmp_p4s.dll]

-This problem is reproduceable with 100% success.-

The Plays for Sure plugin does not recognize the
Samsung YP-T8Z. This device is plays for sure certified and works with WMP 10 as a portable device properly. I cannot give instructions on how to reproduce this other than to tell you to get one and try it out. I am unaware if this is a problem with all Samsung players.

I would guess that many people are going to have a problem with this feature as the protocol is identical regardless of the player.

If any further information is required, please let me know.

[Asaf Karagila]

It seems that the Missing Files feature can't handle those runic characters that german/scandinavian bands have in their names/song names.

My entire Mötorhead and half the Nargaroth directory is marked as missing, although it still plays the file.
Just shows it as missing.

[Spiff0x0]

Re: Microsoft Plays For Sure Plug-in v0.3 [pmp_p4s.dll]

Originally posted by Spiff0x0
Winamp 5.2 - Clean Install
Windows XP Home - SP1
Pentium M @ 1.3Ghz - 1Gb RAM
ATI Mobility Radeon 9200 - Driver 6.14.10.6422
SoundMAX Integrated Digital Audio - Driver 5.12.1.3571
DirectX 9.0c
Microsoft Plays For Sure Plug-in v0.3 [pmp_p4s.dll]

-This problem is reproduceable with 100% success.-

The Plays for Sure plugin does not recognize the
Samsung YP-T8Z. This device is plays for sure certified and works with WMP 10 as a portable device properly. I cannot give instructions on how to reproduce this other than to tell you to get one and try it out. I am unaware if this is a problem with all Samsung players.

I would guess that many people are going to have a problem with this feature as the protocol is identical regardless of the player.

If any further information is required, please let me know.

As an additional piece of information...I thought it may be worthwhile to note that this particular device also acts as a USB mass-storage device. There are no drivers required to connect it to any Windows-based machine and it can be explored using Windows Explorer. I don't know exactly how things are recognized, but perhaps it is registered in the system differently than other devices.

Sorry for the copied post, but I was not allowed permission to edit my previous post.

[starfoxmac]

Using 5.2 (Feb 23 2006)

Concerning the text box below Preferences : Portables : Use this query to fine-tune what songs should be included in the Autofill

Entering the following line
rating == 0
and then initiating autofill causes winamp to use max cpu and freeze. Lines such as "rating == 1" ... "rating == 5" immediately bring up the confirmation dialog box.

[Edit --> DJ Egg]
Not sure if I understood you exactly, but rating=0 is not valid.
Try "(rating isempty)" instead.

[Edit --> starfoxmac]
Thanks for the tip - I was going to ask that next. But I think the bug is that if I enter incorrect syntax, I have to end winamp with the task manager and try again.

[sterlingtjones]

Winamp 5.2 - clean install (with NO 3rd-party plugins)
Windows xp pro sp2
amd 3800+ dual core, asus a8n-sli, 2 gigs ram
nividia gforce 6600 81.98
audigy 2 zs
DirectX 9.c

my problem is with the following plugin:
Nullsoft Vorbis Decoder v1.44 [in_vorbis.dll]

when i am listening to a stream that uses oggvorbis the title of the metadata song is missing the artist, i only see album - tracknumber - song title

all previous versions of winamp showed the artist of the song as well.

i have comfirmed on another machine with 5.13 that it shows the artist - album - track - title in the playlist area.

a friend of mine comfirmed that his new install of 5.2 doesnt show the artist metadata either but previous version does.

the stream is being broadcasted with latest oddsock 3.16, icecast and winamp 5.13, the server also has mp3 being streamed as well and the metedata shows up correct with artist.


i have narrowed it down to winamp 5.2 being the problem, and titles with oggvorbis being streamed, no artist name.


i hope this gets fixed.

[ogi010]

Running a clean Install of Winamp 5.2
Running Win XP w/ SP2 (and all updates)
Mother board: Gigabyte GA-K8NSNXP With Bios Update 15
CPU: AMD 3200+ AMD64 754 pin
Ram: 1 Gig Kingston
Video Card: Nvidia 6800GT ver. 8.1.9.8
Sound Card: Realtek AC'97 compatable running 5.10.0.5970
Direct X: 9.0c


I'm getting an "Unhandled exception in winamp.exe (PMP_IPOD.DLL): 0xC0000005: Access Violation Error

Ogi